[Asterisk-Users] iconnecthere 480 error: is there a workaround?

[Mark Spencer]

Is there a Record-Route header in the response that comes back from
iconnect?

Mark

On Sun, 23 Mar 2003, Luke Howard wrote:

>
> >> Or maybe we should send an ACK to them -- I need to read the SIP RFC...
> >>
> >
> >Tried that, doesn't work.
> >
> >I should add that in my config I'm totally behind NAT, both asterisk and
> >an ATA186 that talks to it.
> >
> >So that may be confounding me in terms of what I'm seeing.
>
> I do see the same problem: after a few minutes, the call is dropped (this is
> using Asterisk patched to ignore 480 "Temporarily not available" errors). From
> the log below it _seems_ like iConnectHere is waiting for an acknowledgment
> to the 480, but you noted that you tried this? It seems to be purely a
> signalling problem as the call is setup fine between the SIP phone and the
> gateway (which in this case appeared to be somewhere in Austria...)
>
>   -- Executing Macro("SIP/515-Office-b8b1", "iconnecthere|33145207135|60") in new stack
>   -- Executing Dial("SIP/515-Office-b8b1", "SIP/33145207135 at iconnecthere|60|r") in new stack
>   -- Called 33145207135 at iconnecthere
>   -- SIP/iconnecthere-ec91 is ringing
>   -- SIP/iconnecthere-ec91 answered SIP/515-Office-b8b1
>   -- Attempting native bridge of SIP/515-Office-b8b1 and SIP/iconnecthere-ec91
>   -- Got SIP response 408 "Request Timeout" back from 213.137.73.178
> == Spawn extension (macro-iconnecthere, s, 1) exited non-zero on 'SIP/515-Office-b8b1' in macro 'iconnecthere'
> == Spawn extension (local, 933145207135, 1) exited non-zero on 'SIP/515-Office-b8b1'
>
> -- Luke
>
> --
> Luke Howard | PADL Software Pty Ltd | www.padl.com
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>