[Asterisk-Users] Channel Bank FXS Questions

[Wade Weppler]

The channel bank should have your amphenol connector(s).  You should consult
your channel bank doc's for wiring requirements, as some manufacturers
deviate from the standard 50-pin amphenol wiring.

-wade

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of tns at cwkb.com
> Sent: Saturday, March 22, 2003 6:04 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Channel Bank FXS Questions
> 
> 
> Here is my question.  We have a Asterisk PBX with an T400P Card.  We have
> 2 T1's comming into this card from a Channel bank.  So this gives us 48
> Channels and 48 Extensions.
> 
> Here's my issue: How and where do my extensions get punched down?  Is
> there a 24 extension FXS Card with an Amphenol Interface on it?  Or ?
> This is where I am getting lost.  I am used to seeing the Extension Cards
> be handled by the PBX System I am not seeing how this is done with the
> Asterisk System.
> 
> I hope this is making sence.  Could someone please shed some lite on this
> subject.
> 
> Thank you,
> 
> Geoff
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users