[Asterisk-Users] Standalone S100U: Is there some trick?

[Brian Capouch]

I am using an ATA 186 as my primary station interface, so I thought, 
"Why not move that S100U over to another box and gain myself another 
remote client?"

So on the "main" machine I removed the line "fxoks=2" and then in 
/etc/asterisk/zapata.conf I removed the references to channel 2.

Then on the new machine, I did a full install of asterisk, and reversed 
what I had been doing, removing the "fxsks=1" line, and then the 
references to channel 1 in /etc/asterisk/zapata.conf

The "main" server restarted and appears to work just fine; the "S100U" 
server won't start.  I get the following messages at the tail of the 
console:

WARNING[16384]: File chan_zap.c, Line 580 (zt_open): Unable to specify 
channel 2: Device or resource busy
ERROR[16384]: File chan_zap.c, Line 4591 (mkintf): Unable to open 
channel 2: Device or resource busy
here = 0, tmp->channel = 0, channel = 2
ERROR[16384]: File chan_zap.c, Line 6189 (load_module): Unable to 
register channel '2'
WARNING[16384]: File loader.c, Line 273 (ast_load_resource): 
chan_zap.so: load_module failed, returning -1
WARNING[16384]: File loader.c, Line 368 (load_modules): Loading module 
chan_zap.so failed!

Is there a trick to this?

Thanks in advance for any help that might be out there. . .

B.