[Asterisk-Users] ATA186 MGCP or SIP?

[Michiel Betel]

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Jim Archer
Sent: zaterdag 15 maart 2003 9:51
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] ATA186 MGCP or SIP?


Yup, that's the problem.  So now the question is, do I convert to SIP or 
stick with MGCP?  I have MGCP working but, as reported by someone else, 
transfer does not work.  If I convert to SIP can I go back?

> Yes, just load the other firmware again, SIP transfers work with the #,T
method.

Also, I have noticed when I dial from one extension to another the quality 
is good, but when I dial out it is horrific.  I wonder if this is because 
my CPU is too slow?  I have a 1.1GHz on order, but until it comes in I am 
testing on an old 266MHz.

> 266Mhz is too slow, voiceprompts get choppy, and codec conversion is not
fast enough 

I would appreciate any suggestions.




--On Saturday, March 15, 2003 9:15 AM +0100 Michiel Betel 
<michiel at betel.nl> wrote:

> You have the skinny/mgcp firmware loaded, not the SIP one... Get 
> ata18x-v2-15-020927a-2.zip from cisco (or contact me off-list)

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users