[Asterisk-Users] How to transfer a call??

[WipeOut ™]

What is the correct syntax to use the 't' option??

This is the current line in my extensions.conf
exten => 9998,1,Dial,SIP/9998
So would I change it to 
exten => 9998,1,Dial,SIP/9998,t

Thanks.

----- Original Message -----
From: Pertti Pikkarainen <ppik at lanwan.fi>
Date: Fri, 14 Mar 2003 13:50:21 +0200 
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] How to transfer a call??

> 
> Negative side effect with 't' option:  all the local SIP-to-SIP media
> streams travel trough Asterisk instead of going direct.
> 
> Right now I'm using SNOM's transfer option instead.
> But now I can't use *  call parking  because of that. Using  #  is 
> probably better
> if there are no scaling problems.
> 
> Regards Pertti
> 
> 
> 
> Steven Critchfield wrote:
> 
> >If you search the archives you would find that for IP phone you need to
> >add a 't' option to the end of your dial command. The 't' option will
> >let the user dial '#' to get the systems attention, then dial an
> >extention for the transfer.
> >
> >On Fri, 2003-03-14 at 03:32, =?iso-8859-1?B?V2lwZU91dCCZ ?= wrote:
> >  
> >
> >>Hi,
> >>
> >>Firstly let me start off by saying that asterisk is one of the most amazing pieces of open source I have seen, it rates right up there with Apache, OpenOffice, MySQL and even Linux itself.. Nice work!!
> >>
> >>I have just installed my first server, thanks to the astinstall script.. and I have read the Handbook (ver 1) and the white paper PDF's.. and I have managed to setup 2 extentions and make calls between them using MSN Messenger, nothing fantastic but its a start..
> >>
> >>One answer is still missing.. How do I transfer a call to another ext?? I am looking at only using IP phones and so for the test system I am using MSN Messenger.. The final solution will probably use a linux softphone line gnophone or linphone..
> >>
> >>All I have been able to find in the docs about call transfer is using a normal phone handset and hook-flash (not quite sure what that it, I am new to telephony)..
> >>
> >>So I guess what I am asking is what do I need to configure or do to be able to transfer a call from one IP ext to another??
> >>
> >>Thanks.. 
> >>    
> >>
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze