[Asterisk-Users] iconnect quality?
Gregg Lebovitz
gregg at lebovitz.net
Tue Mar 11 17:01:31 MST 2003
Jim,
I am seeing the same hangup problem.
The only client I am using with iconnect is their windows dialer. It
seems to work well.
Gregg
On Tue, 2003-03-11 at 18:17, Jim Archer wrote:
> Ok! When I use the 7777 prefix and I allow gsm it does work! And the
> quality is fine.
>
> There are two problems we're having now.
>
> 1 - From watching the udp fly by, it seems that iconnect does not know when
> we hang up. For example, if I call a voice mail and it starts giving me
> its speal and I hang up, iconnect stays connected until the VM hangs up at
> its end.
>
> Next, if we try to call out via iconnect from a sip client extension (like
> a windows soft phone) all we hear is horrible noise.
>
> Has anyone else had these issues?
>
> Jim
>
>
> --On Tuesday, March 11, 2003 3:34 PM -0500 Gregg Lebovitz
> <gregg at lebovitz.net> wrote:
>
> > I haven't play around enough to know whether or not the 7777 prefix is a
> > toggle. I will do some experimenting and let you know. Right now I am
> > prefixing all my calls with 7777.
> >
> > My experience is that when the carrier's format is G723.1, you can't
> > hear the incoming voice. When it is in G711 you can. I have made several
> > calls using G711 and they are acceptable quality. Note that if you
> > disallow=gsm in the sip.conf file you will get the 488 media errors you
> > reported earlier.
> >
> > Below are my config files for sip and the linejack cards:
> >
> > ;
> > ; SIP Configuration for Asterisk
> > ;
> > [general]
> > port = 5060 ; Port to bind to
> > bindaddr = 0.0.0.0 ; Address to bind to
> > context=iconnect ; Default for incoming calls
> > allow=gsm
> > allow=ulaw
> > allow=alaw
> >
> > ;register=1813342XXXX:XXXXXX at sipauth.deltathree.com
> > ;register=1202454XXXX:XXXXXX at sipauth.deltathree.com
> >
> > [iconnecthere]
> > type=friend
> > username=XXXXXXXX
> > secret=XXX
> > host=sipauth.deltathree.com
> >
> > ;
> > ; Linux Telephony Interface
> > ;
> > ; Configuration file
> > ;
> > [interfaces]
> >
> > mode=dialtone
> > format=ulaw
> > echocancel=medium
> > silencesupression=no
> >
> > context=local
> > context=default
> >
> > txgain=100%
> > rxgain=100%
> > device => /dev/phone0
> >
> >
> >
> > On Tue, 2003-03-11 at 14:28, Jim Archer wrote:
> >> Hi Greg and thanks very much...
> >>
> >> A few questions...
> >>
> >> First, regarding the 7777 prefix, it seemed that this acts as a toggle,
> >> switching from the one codec to the other. But how do I set which me
> >> system uses by default? Or does iconnect always use the high bandwidth
> >> one by default (such that the 7777 always switches to the low bandwidth
> >> one)?
> >>
> >> Next, I am still struggling to understand the SIP options and what goes
> >> where. Could you please tell me where the format command goes? Is this
> >> an option on the channel? I thing the allow goes in sip.conf.
> >>
> >> Finally, does this have any impact on the problem where the person
> >> called can not be heard?
> >>
> >> Thanks!!!
> >>
> >> Jim
> >>
> >> --On Tuesday, March 11, 2003 1:35 PM -0500 Gregg Lebovitz
> >> <gregg at lebovitz.net> wrote:
> >>
> >> > Jim,
> >> >
> >> > I changed my extensions entry for iconnect to:
> >> >
> >> > exten => _1XXXXXXXXXX,1,Dial,SIP/7777${EXTEN}@iconnecthere
> >> >
> >> > and my calls work fine with ulaw. I am calling from a linejack card
> >> > with format=ulaw and SIP with allow=ulaw.
> >> >
> >> > Gregg
> >> >
> >> > On Mon, 2003-03-10 at 23:01, Jim Archer wrote:
> >> >> --On Monday, March 10, 2003 4:47 PM -0300 Dan Fernandez
> >> >> <danfernandez00 at hotmail.com> wrote:
> >> >>
> >> >> > Iconnect uses codecs g723 and g711 that can be configured for each
> >> >> > account (you can change them by the 7777 prefix)
> >> >>
> >> >> I tried adding the 7777 in front of a number and it reliably generates
> >> >> error "488 invalid media."
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> Asterisk-Users mailing list
> >> >> Asterisk-Users at lists.digium.com
> >> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> > _______________________________________________
> >> > Asterisk-Users mailing list
> >> > Asterisk-Users at lists.digium.com
> >> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >> _______________________________________________
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list