[Asterisk-Users] E1 + T1 timing in one box

[Michiel Betel]

Thanks! I'll set the dipswitch on the CAC to provide sync, currently the T1
is free running, but its only been up for an hour or 3 so no slips yet.

Will excessive slips generate a yellow alarm? Then I'll know what to
watch...

Michiel Betel

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Don Pobanz
Sent: dinsdag 11 maart 2003 20:59
To: 'asterisk-users at lists.digium.com'
Subject: RE: [Asterisk-Users] E1 + T1 timing in one box


Sure, the Digium T1 can be left in free-run. The place to set up loop 
(or line) timing is in the CAC channel bank. That way there wouldn't be 
slips.

Don Pobanz

On Tuesday, March 11, 2003 1:33 PM, Mark Spencer 
[SMTP:markster at digium.com] wrote:
> > Question is how I should set the sync timing in zaptel.conf though, 
> > The E1 gets sync from the network, but can an E1 slave to that? (E1 
> > -T1 timing is
> > quite different) or should I let the T1 sync to the CAC?
>
> You will leave the E1 syncing from the network and the T1 in
free-run.
>
> You will definitely have slip in the arrangement but it shouldn't 
> affect you unless you try to run data or are listening to a very 
> smooth
tone.
>
>
> Mark
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users