[Asterisk-Users] iconnect quality?

[Gregg Lebovitz]

Dan,

I am having similar issues. I don't quite understand how you change the
codec at iconnect (i.e. what do you mean by using the 7777 prefix?).

Gregg

On Mon, 2003-03-10 at 14:47, Dan Fernandez wrote:
> Iconnect uses codecs g723 and g711 that can be configured for each account
> (you can change them by the 7777 prefix)
> 
> With their dialer and g723 I can here just fine (I  have a 64k broadband
> connection). With their dialer and g711 the quality suffers greatly.
> 
> With * and GSM I cannot here anything (and don´t know if they can here me).
> The call gets logged on  iconnect´s CDR. Upon looking at the SIP debug
> everything appears just fine, but again, I cannot hear anything.
> 
> With * and ulaw or mlaw I can hear the first 5 secs and nothing else.
> 
> I have tried FWD (not going through *) which uses g711 and I have had nor
> problem whatsoever.
> 
> ----- Original Message -----
> From: "Jim Archer" <jim at archer.net>
> To: <asterisk-users at lists.digium.com>
> Sent: Monday, March 10, 2003 8:51 AM
> Subject: [Asterisk-Users] iconnect quality?
> 
> 
> > Does anyone here use iconnect regularly with Asterisk?  If so, what do you
> > think of its reliability and quality?  I used up my 10 free minutes just
> > getting it to work.
> >
> > By the end it was working, but I found that (1) many calls did not
> connect,
> > due to a variety of errors reported by them (service unavailable and such)
> > and (2) when I did connect, I could be heard but I could not hear the
> > person I was talking to.
> >
> > I would appreciate hearing any experiences.
> >
> > Thanks!
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users