[Asterisk-Users] red alarm on wildcard

[duncan]

>Red Alarm on an X100P means that it does not detect a phone line connected
>to the device.  I would double check your cabling.  The loadzone only has
>to do with the sound of dialtone, etc, and i wouldn't mess with it until
>you have the basic functionality working.

ok now i when i plug the phoneline into the "phone" socket of the X100P 
there are no alarms, but when i dial the phone line its connected to i get 
"number busy" (from my phone) and when i reboot the machine it kernel 
panics (scroll lock and caps lock flashing).  i havent installed anything 
else, except a default "everything" redhat 7.2 and webmin.

so i decided to unload all the modules[0] before i reboot - and i get this 
message "rmmod: module wcfxo is not loaded" and then rebooting doesnt cause 
a kernel panic.  after i do this and reboot the machine i get a red alarm 
on the X100P card again, even thought the line is still connected to the 
"phone" socket of the card.  any ideas?  is there any way i can get these 
modules to autounload before a reboot, the kernel panic problem was the 
reason i did a machine rebuild in the first place (didnt think through the 
problem hard enough that time).



duncan

[0]
/sbin/rmmod audio
/sbin/rmmod wcfxo
/sbin/rmmod wcusb
/sbin/rmmod zaptel