[Asterisk-Users] ZT_LOADZONE problem solved

[Art O'Dea]

I believe I found my problem - an incorrect IP address for a network 
time server in the ATA-186 configuration. I entered a valid network 
time server address in the NTPIP field, and the error is gone.

Art

On Sunday, March 2, 2003, at 11:33 AM, Art O'Dea wrote:

> I have zaptel and zapata compiled and installed for the X100P in my 
> system (the * box has the x100p, and the ATA-186 and * are on a 
> class-c network, all behind a firewall. Calling in to voicemail works 
> fine, but ringing the ATA gives me the ZT_LOADZONE error, the line 
> continues to ring when the ATA phone picks up.
>
> Following your suggestion, I'd guess it would have something to do 
> with zaptel since ZT_LOADZONE is referenced in zaptel.c - but could it 
> be something in the ATA-186 configuration?
> Art
>
>> On Fri, 2003-02-28 at 19:51, Art O'Dea wrote:
>> > I have an ATA-186 in a SIP configuration (following Shawn Djernes
>> > how-to), but I get the following error at the asterisk console when 
>> I
>> > try to call the phone connected to the ATA:
>> >
>> > ioctl(ZT_LOADZONE) failed: Inappropriate ioctl for device
>> > Failed to register zone 'United States / North America': No data 
>> >available
>> >
>> > Everything works if I remove indications.conf from /etc/asterisk -
>> > actually, I still get an error message, but it doesn't appear to be
>> > fatal.
>>
>> Quick guess, since ZT_* functions have to do with zaptel or zapata, 
>> make
>> sure you compiled and installed them, even if you aren't using zapata
>> hardware.
>>
>> -- 
>> Steven Critchfield  < critch at basesys.com >
>