[Asterisk-Users] Message waiting light on Cisco 7960

[Mark Spencer]

Yes, it does.  Note also that you can specify mailbox=XXX,YYY and MWI will
display if there are messages in either mailboxe XXX or YYY.

Mark

On Fri, 28 Feb 2003, Raymond McKay wrote:

> Will that work in the zapata.conf file also for phones that support MWI?
>
> ----- Original Message -----
> From: "Benjamin Miller" <BGMiller at dccinc.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Friday, February 28, 2003 10:13 AM
> Subject: RE: [Asterisk-Users] Message waiting light on Cisco 7960
>
>
> > Just put a mailbox=XX in as part of the phone's definition in sip.conf
> where XX is the voicemail box number for that phone.
> >
> > -----Original Message-----
> > From: Lenny Tropiano / asterisk.org Mailing list
> > [mailto:asterisk at enterprise.icus.com]
> > Sent: Thursday, February 27, 2003 11:28 PM
> > To: asterisk-users at lists.digium.com
> > Subject: [Asterisk-Users] Message waiting light on Cisco 7960
> >
> >
> > Can I get the voicemail application turn on / off the MWI (message waiting
> indicator)
> > on the Cisco 7960?
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>