[Asterisk-Users] Re: Connections, but no voice paths except by

[Daniel Flickinger]

Moshe,

   I was having the same problem with my software only asterisk pbx setup.  I 
was using two kphones on different machines, connecting through a machine 
running asterisk.  They would connect just fine, but voice was not getting 
routed through.  I installed linphone, which can be found at 
wwww.linphone.org, on the machines running kphone, and can now get very clear 
voice communications, but only for 5 seconds.  Also, after installing alsa 
drivers on the linux systems, I could call a linux machine running kphone from 
a windows machine running estara's softphone and get VoIP just fine, but not 
vice versa.  Linphone is open source, so you might want to give it a try.  
Eventually, I'm going to try to port one of those programs to a Sharp Zaurus 
SL-5600, so I'm trying to nail down their native functionality first.  I hope 
this helps, and if anyone has any idea of why I can only maintain voice 
connections for 5 seconds, I would appreciate your input.  Thanks

Daniel