[Asterisk-Users] Newbie, Loaded Asterisk can't figure out manual

[Andy Hester]

John,
	I agree that the manual in its current state is not particularly
comprehensive or cohesive shall we say.  Here are my suggestions:


1. Configure Zaptel.conf in /etc

2. Configure Zapata.conf in /etc/asterisk to match your definitions in
zaptel

3. Configure your end user devices in their config file as appropriate.

4. Write extensions.conf and voicemail.conf

Should be ready to test.

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Your Name
Sent: Sunday, June 29, 2003 7:56 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Newbie, Loaded Asterisk can't figure out
manual


Just loaded it yesterday running on TDM400P and X100P.  I have also
loaded the sample setttings.

1.  What's the first thing you guys do?  Change .conf files or do it
from CLI?

2.  Just trying to get it up and running to see if everything works.  Do
I setup Extensions first?

3.  Can I just remove some of the ; within the .conf files to get a
simple PBX working?

I would appreciate your thoughts and knowledge!

John
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users