[Asterisk-Users] No dial Tone but its registering from remote site! Anyone with idea?

[John Todd]

Make sure your SIP peer for the ATA-186 has "nat=1" and 
"canreinvite=no" set in it.  If that doesn't work, you should look 
harder at your firewall configurations.

JT


>Hi all -
>
>Here is more info.  I have tested ATA186 and xten client with the 
>SAME network and it works.
>BUt when I took the diff. approach as below I see the remote client 
>is registering on the Asterisk Gateway box which is running a 
>Firewall too.  I did open the port 5060 on the firewall.
>
>192.168.100.x
>  |
>  | 192.168.100.1
>(asterisk Gateway/Firewall)
>  | public IP
>  |
>INTERNET
>  |
>  |public IP
>(Linksys box, just NAT)  No firewall!
>  |  192.168.200.1
>  |
>ATA adater in 192.168.200.x
>
>It give me the info as mentioned below!!!  It is registerin>Name/username   
>Host                 Mask             Port     Status
>>jack/jack  192.168.200.104 (D)  255.255.255.255  5060     Unmonitored
>>jill/jill    192.168.100.195 (D)  255.255.255.255  5066     Unmonitoredg!
>
>
>
>
>>>You haven't quite supplied enough data to solve this problem.
>
>>>Have you successfully used your ATA-186 on Asterisk when they're 
>>>on the same network segment (no firewall)?  Is your firewall a 
>>>NAT?   It appears that there is a NAT at both ends of this 
>>>session.  That probably won't work, if that's what your diagram 
>>>means.  Or does your Asterisk server have two NICs in it?
>
>>>JT
>
>
>
>>Hello Everyone -
>>
>>Well, I think I'm getting closer with the asterisk connection. 
>>This is my setup and I keep getting this error below in ,my 
>>/var/log/asterisk/messages file.  I have opened 5060 port on the 
>>firewall box.
>>I would this is Warning which I can ignore!  But I see the 
>>connetcion coming but NO DIAL TONE on mt ata186 box sitting in my 
>>192.168.200.x site!
>>
>>I'm using ATA186(cisco adapter) at my 192.168.200.x site
>>Xten soft sip cient in 192.168.100.x site
>>ASTERISK running on my GW towards the 192.168.100.x site.
>>
>>192.168.100.x |(asterisk GW)| public IP ----- INTERNET ------ 
>>public IP | 192.168.200.x
>>
>>Jun 26 23:02:17 WARNING[4101]: File chan_sip.c, Line 385 
>>(__sip_xmit): sip_xmit of 0xbf1f0200 (len 355) to 192.168.200.104 
>>returned -1: Operation not permitted
>>Jun 26 23:02:21 WARNING[4101]: File chan_sip.c, Line 385 
>>(__sip_xmit): sip_xmit of 0xbf1f0a00 (len 294) to 192.168.200.104 
>>returned -1: Operation not permitted
>>Jun 26 23:02:21 WARNING[4101]: File chan_sip.c, Line 385 
>>(__sip_xmit): sip_xmit of 0xbf1f0200 (len 355) to 192.168.200.104 
>>returned -1: Operation not permitted
>>
>>
>>My ata186 box is registering to my asterisk server.  When I so a 
>>"sip show peers", it shows
>>
>>Name/username    Host                 Mask             Port     Status
>>jack/jack  192.168.200.104 (D)  255.255.255.255  5060     Unmonitored
>>jill/jill    192.168.100.195 (D)  255.255.255.255  5066     Unmonitored
>>
>>thanks
>>
>
>_________________________________________________________________
>Help STOP SPAM with the new MSN 8 and get 2 months FREE* 
>http://join.msn.com/?page=features/junkmail
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users