[Asterisk-Users] RE: [Asterisk-Users] RE: [Asterisk-Users] cisco 186 helpp!ª!!!!

[Shawn L. Djernes]

I wrote the one on My Site Djernes.org.  If you wish to modify it for
setting up the Device for MGCP then go ahead.  I will either post it here or
you can post it and send me a link.  I am going to finish the SIP one when I
can dig up some time to write.

Shawn

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Florian Overkamp
Sent: Friday, June 27, 2003 14:02
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] RE: [Asterisk-Users] cisco 186 helpp!ª!!!!

Citeren "Shawn L. Djernes" <shawn at djernes.org>:

> Hello,
>
> If you have the SIP firmware load in the unit then UseSIIP should be the
> first yellow box in the left column.  If you do not have that you may have
a
> MGCP version and need to get a hold of the SIP firmware and Flash the unit
> first.

Oh BTW, the MGCP load works fine with Asterisk too, but the driver approach
is
different so the howto from Djernes would not match. It can be done however.

--
Met vriendelijke groet,
Florian Overkamp
ObSimRef BV
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users