[Asterisk-Users] RE: [Asterisk-Users] cisco 186 helpp!ª!!!!

[Shawn L. Djernes]

Hello,

If you have the SIP firmware load in the unit then UseSIIP should be the
first yellow box in the left column.  If you do not have that you may have a
MGCP version and need to get a hold of the SIP firmware and Flash the unit
first.

Shawn L. Djernes

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Jorge Cisneros
Sent: Thursday, June 26, 2003 18:31
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] cisco 186 helpp!*!!!!

toy buy my first cisco 186 but when i read this page
http://www.djernes.org/~shawn/ata186.htm

i cant find in my dev  page some parameters just like " UseSIP "

what i need to do to show this parameters

Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030627/78fa6399/attachment.htm