[Asterisk-Users] VoiceMail recording dialtone

[Sam Bingner]

OK, I tried upping it to 2000.. See if that changes anything

I still don't understand why it would end up directly in voicemail if it
picked the line back up instead of calling extension "s" again if the
telco's hangup signal was interpreted as a ring?

Sam

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Martin Pycko
Sent: Thursday, June 26, 2003 5:24 AM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] VoiceMail recording dialtone


Unless your telco signals hangup with a dialtone ..... it should help. The
thing is that most propably your X100P hangs up and then picks up the line
due to something ... that was my original idea.

Martin

On Wed, 25 Jun 2003, Sam Bingner wrote:

> I don't understand how that would affect the voicemail recording
> dialtone when the phone never rang?
>
> 1, User calls
> 2, Nobody answers in 20 seconds
> 3, greeting is played (user hangs up somewhere in here, close to end)
> 4, voicemail is called, and records a dialtone
>
> -- phone never rings again here --
>
> Sam
>
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Martin
> Pycko
> Sent: Thursday, June 19, 2003 11:57 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] VoiceMail recording dialtone
>
>
> Well experiment yourself with the code.
>
> in wcfxo.c
>                 /* Don't accept a ring for another 1000 ms */
>                 wc->ringdebounce = 1000;
>
> Try a diffrent value (e.g. 3000 for 3 sec)
> and in zaptel.h
>
> #define        RING_DEBOUNCE_TIME      500     /* 500 ms ring debounce
> time */
>
> try the same value as in wcfxo.c
>
> recompile/reload and test
>
> regards
> Martin
>
> On Thu, 19 Jun 2003, Sam Bingner wrote:
>
> > Zaptel was the version from about 4 days ago when I sent this
> > message, I updated again yesterday night
> >
> > Sam
> >
> > Quoting Martin Pycko <martinp at digium.com>:
> >
> > > How old is your zaptel code ?
> > > Mark recently increased some timer for that.
> > >
> > > Martin
> > >
> > > On Wed, 18 Jun 2003, Sam Bingner wrote:
> > >
> > > > I have an extension setup with voicemail, for incoming calls on
> > > > an X100P card.  It quite often will record about 15 seconds of
> > > > dialtone... I'm guessing that it picks up the line after the
> > > > outgoing line has been disconnected.
> > > >
> > > > Has anybody else run into this problem?  Shouldn't chan_zap be
> > > > detecting the hangup and ending the connection?
> > > >
> > > > Sam
> > > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> >
> >
> > -------------------------------------------------
> > This mail sent through IMP: http://horde.org/imp/
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3243 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030627/c838ca4e/smime.bin