[Asterisk-Users] X100P and PSTN caller id

[Dan]

Hi,

I have changed the value to 0 and recompile, but the result is the same.
I stil see my own PSTN number as CallerID.

Trying to use another PSTN line with no CallerID service activated, I get as
Caller ID "asterisk".
This means that Asterisk does something anyway.

Dan

----- Original Message ----- 
From: "K. C. Li" <li at laser.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, June 26, 2003 4:51 PM
Subject: Re: [Asterisk-Users] X100P and PSTN caller id


> On Thu, 26 Jun 2003, Dan wrote:
>
> > Gary sais some time ago:
> > "Have you got the number of rings for caller-id set right ??
> > its in chan_zap  somewhere from memory.."
> >
> > It seems that in US it is after first ring, but in Europe it is before
the
> > first ring (but not allways).
>
> We are with BT and the caller ID informationo is apparently available just
> before the first ring. I don't know whether the format of the information
> is similar to the U.S. caller ID information.
>
> I found the following define in asterisk/chan_zap.c:
>
> /* Typically, how many rings before we should send Caller*ID */
> #define DEFAULT_CIDRINGS 1
>
> But it talks about sending caller ID, not receiving from the FXO.
>
> Regards,
>
> Kwong Li
> li at laser.com
> Laser Business Systems Ltd.
> http://www.laser.com
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>