[Asterisk-Users] X100P and PSTN caller id

[Dan]

Hi,

chan_zap.c is a big file.
I would be nice to have something like in Cisco ATA186.
http://www.cisco.com/univercd/cc/td/doc/product/voice/ata/ataadmn/ata8mgcp/mgcpaape.htm#1023728

In that way you can use it allmost everywhere in the world, just by changing
a parameter.

Thanks,
Dan

----- Original Message ----- 
From: "Gary" <gary at ausmail.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, June 26, 2003 4:05 AM
Subject: Re: [Asterisk-Users] X100P and PSTN caller id


> Have you got the number of rings for caller-id set right ??
>
> its in chan_zap  somewhere from memory..
>
> Actually it would be nice if it was actually in zaptel.conf instead..
>
> Mark ?
>
> On Wed, 25 Jun 2003 22:37:36 +0300, Dan wrote:
>
> >Hi all,
> >
> >I have an X100P card which works fine with Asterisk, but I have some
> >problems with the caller id.
> >When someone calls me from the PSTN, I see as a callerid my own PSTN
number.
> >There is a specific setting for this type of CallerID in order to be used
> >with X100P?
> >
> >Thank you,
> >Dan
> >
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
>
> .
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>