[Asterisk-Users] Asterisk CPU power requirements

[Dave Alan Caruana]

Many thanks, Martin ..
worked fine with dtmfmode=info

Dave

----- Original Message ----- 
From: "Martin Pycko" <martinp at digium.com>
To: <asterisk-users at lists.digium.com>
Sent: Monday, June 23, 2003 4:32 PM
Subject: Re: [Asterisk-Users] Asterisk CPU power requirements


> You need to find out which way your SIP gateway wants to receive the
> DTMFs. There are three ways to do that. Read sip.conf.sample.
> 
> Martin
> 
> On Mon, 23 Jun 2003, Dave Alan Caruana wrote:
> 
> > hi there,
> > I have an installed & working Asterisk server,
> > which I am using to connect to a SIP service
> > abroad. Although I can hear the IVR from the
> > ITSP, I cannot seem to send them digits from
> > my phone.
> >
> > I have also noticed that the CPU usage on my
> > machine is up to 100% constantly and 99.9%
> > of that is going to Asterisk, even when asterisk
> > is just idle and doing nothing at all ..
> >
> > The machine is a Celeron 800 with 256Mb of RAM,
> > and there is a Digium single span E1 card
> > going into it.
> >
> > Is something wrong? or do I just need more
> > CPU power?
> >
> > cheers
> > Dave
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users