[Asterisk-Users] X100P Dialing either Too Soon or Too Fast?

[Martin Pycko]

Did you try to use 'w' as a digit before dialing the number like this:

exten => _X.,1,Dial,Zap/1/wwwww${NUMBER}

You could also try to put 'w' inbetween the digits.

regards
Martin

On Tue, 17 Jun 2003, John Laur wrote:

>
>
> Quite frequently, outgoing calls from the X100P cards here will not dial
> properly. Instead of hearing the ringing after the Zap interface picks
> up, I'll hear silence for a while then the 'If you'd like to make a call
> please hang up and try again' recording as if zaptel picked up the line,
> punched only a couple digits and then left it.
>
> I assume that either zaptel is sending the dtmf before the telco is
> ready to get it or is sending the digits too fast. I have tried setting
> toggling overlapdial in zaptel.conf, and I have tried fiddling with the
> timing parameters a little, but I don't know what each number really
> does (and think that bad values here may be bad anyway)
>
> Does anyone have any ideas to accomplish:
>
> 1) Delay zaptel sending dtmf by a few milliseconds
> 2) Have zaptel send dtmf digits slower
>
> Thanks,
> John
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>