[Asterisk-Users] zttool shows OK for the T400P board which is not configured/start ed

[Alex Zarubin]

There are 2 T400P boards in a box. Just one board is configured in
zaptel.conf:

span=1,1,0,esf,b8zs
span=2,0,0,esf,b8zs
span=3,0,0,esf,b8zs
span=4,2,0,esf,b8zs
...
(no configuration for spans 5-8)

ztcfg -vv reports 96 channels configured. But zttool shows OK on all 8 spans
(4 lights on board 1
are green, no lights on board 2).

A minor issue, should be easy to fix.

Thank you.
Alex Zarubin


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030616/b0da7910/attachment.htm