[Asterisk-Users] E1, E100P

[Mark Spencer]

Sounds like a timing issue most likely.  Do you get them frequently or
infrequently?  It's okay if you get one every few hours or days but if
you're getting them every few minutes with normal call volumes then
something (likely timing) is wrong.

Mark

On 13 Jun 2003, Levent Guendogdu wrote:

> Hi Dave, hi all,
>
> I've the same problem for a few days now on an E1 with an E100P. Since
> it started to happen after a cvs update last week, I assume this is
> nothing hardware or telco related but due to some changes in zaptel,
> libpri or chan_zap.
>
> What I've seen, too, is:
> WARNING[11276]: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on
> 48 failed: Unknown error 500
> PRI got event: 8
>
> Anyone else got these?
>
> I can still place and receive calls on that line however.
>
> Bye,
>  Lev.
>
>
> On Thu, 2003-06-12 at 16:14, Dave Alan Caruana wrote:
> > hi guys,
> > I have a little problem maybe you can help ...
> > I have an asterisk setup, with an E100P, and an ISDN-PRI 30 channel
> > line from the telco going into it .. the E1 line is OK, because plugged into
> > a Lucent Portmaster 4 it works OK .. plugged into the asterisk box
> > I just get an engaged tone, and asterisk posts this message on screen :
> >
> > WARNING[1167272000]: File chan_zap.c, Line 5275 (pri_fixup): Call specified,
> > but not found?
> > WARNING[1167272000]: File chan_zap.c, Line 5816 (pri_dchannel): Hangup on
> > bad channel 1
> >
> > With PRI Debug switched on, I get the debug log as per file attached ..
> >
> > I'm in Malta, but the ISDN should be a regular one as in the rest of europe,
> > as far as I know .. for now all i'm trying to do is to get ISDN calls
> > answered,
> > and thrown directly into the asterisk demo, which works fine when contacted
> > over SIP / H323.
> >
> > cheers
> > Dave
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>