[Asterisk-Users] Red led is blinking ..

[Steve Underwood]

Jorge wrote:

>Hi,
>
>I have an E100P card.
>
>My zaptel.conf is:
>span=1,0,0,cas,ami,crc4
>bchan=1-2
>dchan=3
>loadzone = us
>defaultzone=us
>
>after execute ztcfg red led becomes blinking, why ?
>
>Anybody known the led's table of thruth ?
>
That looks like a pretty wacky configuration. ami? cas with a d-channel? 
d-channel as channel 3? That doesn't look too good. Something like:

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

might be a more realistic configuration.

Regards,
Steve