[Asterisk-Users] E1, E100P

[Martin Pycko]

His problem was that he had only one number assigned to the whole E1. So
telco didn't send any called number in SETUP. Adding immediate=yes
to zapata.conf helped here.

Martin

On 13 Jun 2003, Levent Guendogdu wrote:

> Hi Dave, hi all,
>
> I've the same problem for a few days now on an E1 with an E100P. Since
> it started to happen after a cvs update last week, I assume this is
> nothing hardware or telco related but due to some changes in zaptel,
> libpri or chan_zap.
>
> What I've seen, too, is:
> WARNING[11276]: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on
> 48 failed: Unknown error 500
> PRI got event: 8
>
> Anyone else got these?
>
> I can still place and receive calls on that line however.
>
> Bye,
>  Lev.
>
>
> On Thu, 2003-06-12 at 16:14, Dave Alan Caruana wrote:
> > hi guys,
> > I have a little problem maybe you can help ...
> > I have an asterisk setup, with an E100P, and an ISDN-PRI 30 channel
> > line from the telco going into it .. the E1 line is OK, because plugged into
> > a Lucent Portmaster 4 it works OK .. plugged into the asterisk box
> > I just get an engaged tone, and asterisk posts this message on screen :
> >
> > WARNING[1167272000]: File chan_zap.c, Line 5275 (pri_fixup): Call specified,
> > but not found?
> > WARNING[1167272000]: File chan_zap.c, Line 5816 (pri_dchannel): Hangup on
> > bad channel 1
> >
> > With PRI Debug switched on, I get the debug log as per file attached ..
> >
> > I'm in Malta, but the ISDN should be a regular one as in the rest of europe,
> > as far as I know .. for now all i'm trying to do is to get ISDN calls
> > answered,
> > and thrown directly into the asterisk demo, which works fine when contacted
> > over SIP / H323.
> >
> > cheers
> > Dave
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>