AW: [Asterisk-Users] Problem with outgoing spool...

[Thomas Haeger]

OK, sorry for my deficient description...


Scenario is as follwes:

One 4 BRI card ->

	ttyI0 - ttyI7 for outgoing

second 4 BRI card ->

	ttyI8 - ttyI15	for Incoming


My script generates 8 calls with a distance from 2 seconds.
The files in the outgoing dir will be generated with an echo command.
If the distance is smaller than 2 seconds sometimes calls never be initiated
but i can see the verbose messages for the calls.
Then i can see channels if i enter "show channels" in the CLI with state
"DOWN". But nothing else matters.....
This is the point in time i have to restart * and my script.





-----Ursprüngliche Nachricht-----
Von: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thomas
Haeger
Gesendet: Freitag, 13. Juni 2003 15:23
An: Asterisk User
Betreff: [Asterisk-Users] Problem with outgoing spool...


Hi all,

i 've written a little Callgen script for generating calls through the
outgoing spool directory.
The calls goes over 8 ttyI devices to another pbx and come in through other
8 ttyI devices.

But when i generate the calls, sometimes * register the calls but never
initiate them.
Especially when the files come to fast into the outgoing dir.

What can be wrong ?

Is it possible that the i4l driver have a bug ?
Or maybe the spooler is defective ?


Thanks for Help,

Thomas.



*******************************************
beroNet technologies GmbH
Dipl.- Ing. Thomas Häger
Potsdamer Str. 18 A
14513 Teltow

FON:    +49 (0) 3328 3077731
FAX:    +49 (0) 3328 334779
Email:  thomas.haeger at beronet.com
*******************************************

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users