[Asterisk-Users] E1 cards

[Peter Armstrong]

You need to get the ETSI or Euro version of PRA from Telstra and then it
will work, they offer it as well as their quaint version of PRA access.

Peter

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Mark
McKibbin
Sent: Friday, 13 June 2003 1:01 p.m.
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] E1 cards


We are not having any luck with the E100p card here in Australia, it
will work with a crossover cable to another device but will not talk to
our Telco Telstra who probably have a weird implementation of an E1.

Any suggestions on a replacement?

Regards

Mark McKibbin
DCS Internet
64 Queen St
Warragul
Victoria    3820
Australia
www.dcsi.net.au
mark at team.dcsi.net.au
Ph. 1300 665575
Fx. 1300 556595


-----Original Message-----
From: Simon J Mudd [mailto:sjmudd at pobox.com] 
Sent: Friday, 13 June 2003 7:10 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Asterisk logging questions

manousos at inaccessnetworks.com (Michael Manousos) writes:

> > While logger.conf indicates that you can log to a file I can't see 
> > _where_ the logging is sent to (which directory).  Looking at the 
> > source it
seems
> > that the directory used is specified in ast_config_AST_LOG_DIR but I
can't
> > see where this variable is defined.  Help?
> 
> In /etc/asterisk/asterisk.conf, section [directories]: astlogdir => 
> <.....>

Ok. Thanks.  Having installed all the sample conf files I'm slightly
overwhelmed looking for things.

Simon
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users