[Asterisk-Users] Testing two E400P with E1 cross-cable

[Carlos Carús]

Martin Pycko escribió:

>It should be good enough. The problem is propably in software
>configuration ....
>
>Martin
>
>On Wed, 11 Jun 2003, [UTF-8] Carlos Carús wrote:
>

So if cable is ok, the problem must be one of these three:

1.- Config error, as Martin points (most probably)
2.- System can't hold the load (humm..)
3.- Faulty E400P? (don't want to beleive it)

Let's suppose it's a config mistake...


Server#1  (caller) zaptel.conf:
-----------------------------------
span=1,1,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4
span=3,0,0,ccs,hdb3,crc4
span=4,0,0,ccs,hdb3,crc4
# Span 1
bchan=1-15
dchan=16
bchan=17-31
# Span 2
bchan=32-46
dchan=47
bchan=48-62
# Span 3
bchan=63-77
dchan=78
bchan=79-93
# Span 4
bchan=94-108
dchan=109
bchan=110-124
loadzone = fr
defaultzone = fr

Server#2  (callee) zaptel.conf:
-----------------------------------
span=1,1,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4
span=3,0,0,ccs,hdb3,crc4
span=4,0,0,ccs,hdb3,crc4
# Span 1
bchan=1-15
dchan=16
bchan=17-31
# Span 2
bchan=32-46
dchan=47
bchan=48-62
# Span 3
bchan=63-77
dchan=78
bchan=79-93
# Span 4
bchan=94-108
dchan=109
bchan=110-124
loadzone = fr
defaultzone = fr


These are zapata.conf:
---------------------
[channels]
context=inicio
switchtype=euroisdn
signalling=pri_cpe (pri_net in server#2)
rxwink=300        ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0

group=1
signalling=pri_cpe (pri_net in server#2)
channel => 1-15
channel => 17-31
channel => 32-46
channel => 48-62
channel => 63-77
channel => 79-93
channel => 94-108
channel => 110-124


Server#1  (caller) extensions.conf:
-----------------------------------
[general]
static=yes
writeprotect=no
[inicio]
exten => s,1,PlayBack(laxana)
exten => s,2,Goto(s,1)
exten => t,1,hangup
exten => i,1,hangup
exten => o,1,hangup
exten => h,1,hangup


Server#2 (callee) extensions.conf
---------------------------------
[general]
static=yes
writeprotect=no
[inicio]
exten => s,1,Answer
exten => s,2,Agi,600agi
exten => s,3,hangup
exten => t,1,hangup
exten => i,1,hangup
exten => o,1,hangup
exten => h,1,hangup


Do you see something weird???


Thnaks people!!!!!
-- 
Carlos Carús
Ingeniero de Sistemas
carlos.carus at alisys.net <mailto:carlos.carus at alisys.net>
Alisys Software
------------------------------------------------------------------------
Alisys Software, S.L.
Edificio Lexington - C/ Orense, 85
28020 MADRID
Tfno.: 985175935 - 915678474
Fax: 915714244
web: http://www.alisys.net <http://www.alisys.net/>
wap: http://www.alisys.net/wap/