[Asterisk-Users] Testing two E400P with E1 cross-cable

[Carlos Carús]

Martin Pycko escribió:

>Do you see in /proc/interrupts that tor2 receives IRQs on both CPUs ?
>
>Martin
>
>On Wed, 11 Jun 2003, Carlos Carús wrote:
>

Yes, it does too:

$>cat /proc/interrupts
           CPU0       CPU1
  0:     410297          0  local-APIC-edge  timer
  1:          2          2    IO-APIC-edge  keyboard
  2:          0          0          XT-PIC  cascade
  8:          0          1    IO-APIC-edge  rtc
 11:          0          0   IO-APIC-level  usb-ohci
 12:         11          9    IO-APIC-edge  PS/2 Mouse
 14:          0          2    IO-APIC-edge  ide0
 20:      71136      55323   IO-APIC-level  tor2
 25:          8          5   IO-APIC-level  eth1
 27:        383        466   IO-APIC-level  eth0
 28:       2462       2406   IO-APIC-level  aic7xxx
NMI:          0          0
LOC:     410040     410039
ERR:          0
MIS:          0

I've cheched for number of available inodes too, memory usage, etc.. I 
think I have a zaptel misconfig, but I can't see anything wrong...
Or maybe I've made a wrong pinout in the E1 cross cable... I'm using a 
standar UTP cat5 cable, should I need to use shielded cable? Does anyone 
know the specifications of a cross cable for these tests?

Greeting from a totally lost asterisk user!

-- 
Carlos Carús
Ingeniero de Sistemas
carlos.carus at alisys.net <mailto:carlos.carus at alisys.net>
Alisys Software
------------------------------------------------------------------------
Alisys Software, S.L.
Edificio Lexington - C/ Orense, 85
28020 MADRID
Tfno.: 985175935 - 915678474
Fax: 915714244
web: http://www.alisys.net <http://www.alisys.net/>
wap: http://www.alisys.net/wap/