[Asterisk-Users] PRI questions

[Martin Pycko]

switchtype=national is National 2
switchtype=ni1 is National 1

The first is well tested the last was added recently
and is not propably tested well.

regards
Martin

On Sun, 8 Jun 2003 firedude at shorelinuxsolutions.com wrote:

> Ok that's cool.  I'll stick with the national because that's whats
> uncommented now; however the telco wants to know whether its national 1,2
> or 3.  What is the difference and how do I determine that?
> AJ
>
> On Sat, 7 Jun 2003, Steven Critchfield wrote:
>
> > On Sat, 2003-06-07 at 21:26, firedude at shorelinuxsolutions.com wrote:
> > > When I look at the zapata.conf file, I see switchtype=national and its
> > > uncommented.  But I'm still a little confused here cause there appears to
> > > be other options there.  Is there any definitive way for me to determine
> > > which type I need?
> >
> > You only need what will make it work. National is fine. If your telco
> > offered this option, jump on it.
> >
> > While  do not know for certain, I doubt you gain much going with any
> > other options for switch type.
> >
> > > On Sat, 7 Jun 2003, Steven Critchfield wrote:
> > >
> > > > On Sat, 2003-06-07 at 19:14, firedude at shorelinuxsolutions.com wrote:
> > > > > We are in the prossess of ordering a ISDN (PRI) line from Verizon.  There
> > > > > are a couple of questions on the application that I don't understand.  I'm
> > > > > still a newbie here but we're taking the big plunge.  If someone could
> > > > > give me some direction here I would be greatly appreciative.  The
> > > > > questions on their app that I don't understand are:
> > > > > 1.) The Verizon Co will outpulse 10 digits to the PBX, is this
> > > > > satisfactory?
> > > >
> > > > See my other comment, but 10 digits is what you want. "outpulse" is a
> > > > interesting way of putting it. Of course I went through some interesting
> > > > times dealing with our telco in getting them to use terminology that was
> > > > appropriate to the circuit we where ordering.
> > > >
> > > > > 2.)DNLS Digit Dialing - Prefix and Delete - (if yes, what will it be?)
> > > >
> > > > not sure on this one.
> > > >
> > > > > It's also asking for the PBX manufacturer / system model number and the
> > > > > PBX software / release.  Should I just fill in Asterisk and the realease
> > > > > for these questions?
> > > >
> > > > May want to include your T1 card model number(T100P,T400P) too so if
> > > > they want to check up on the FCC cert they can easily.
> > > >
> > > > > Lastly, they wish to know if it is custom or national ISDN and if its
> > > > > national - if it is 1,2,3.  How do I determine this?
> > > > > Thanks for any and all help.
> > > >
> > > > If you look in /etc/asterisk/zapata.conf you will see the options. Looks
> > > > like you need national, but I don't know what version.
> > > >
> > > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>