[Asterisk-Users] Parking calls - why doesn't work?

[Dan]

Hi Wade,

I have no extensions defined starting with 7.
Do not forget that for 702 to 720 I get the correct message .."there is not
any call parked at this extension"...

Dan

----- Original Message ----- 
From: "Wade Weppler" <weppler at wwworks-inc.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, July 31, 2003 8:50 PM
Subject: RE: [Asterisk-Users] Parking calls - why doesn't work?


> Sounds like your active context might have an existing extension 701 or
> starting with 701?
>
> -wade
>
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> > admin at lists.digium.com] On Behalf Of Dan
> > Sent: Thursday, July 31, 2003 1:32 PM
> > To: asterisk-users at lists.digium.com
> > Subject: Re: [Asterisk-Users] Parking calls - why doesn't work?
> >
> > Yup.
> > 701 for parking and 702-720 for parked calls.
> >
> > Dan
> > P.S. Tried with default values too... but without success...
> >
> > ----- Original Message -----
> > From: "Steven Critchfield" <critch at basesys.com>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Thursday, July 31, 2003 8:13 PM
> > Subject: Re: [Asterisk-Users] Parking calls - why doesn't work?
> >
> >
> > > Did you make sure to change the range also?
> > >
> > > On Thu, 2003-07-31 at 10:50, Dan wrote:
> > > > Hi Steven,
> > > >
> > > > Nope. I have change it to 701, because of some former issues with
> > double
> > > > DTMF digits on Cisco 7960.
> > > > This is the exact procedure, but on 701 I hear just the invalid
> > extension
> > > > message.
> > > > What else can it be?
> > > > Checked on 2 different systems, one with a Zaptel device, the other
> > one
> > > > without.
> > > > Both are RH9 with the latest Asterisk version.
> > > >
> > > > Thanks,
> > > > Dan
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Steven Critchfield" <critch at basesys.com>
> > > > To: <asterisk-users at lists.digium.com>
> > > > Sent: Thursday, July 31, 2003 6:38 PM
> > > > Subject: Re: [Asterisk-Users] Parking calls - why doesn't work?
> > > >
> > > >
> > > > > Look at your parking config. You probably have 700 as your parking
> > > > > extension. Then you will hear what extension the call was parked
to.
> > > > > Then you can dial that extension and pick the call back up.
> > > > >
> > > > > On Thu, 2003-07-31 at 07:28, Dan wrote:
> > > > > > Hi,
> > > > > >
> > > > > > I have configured everything as requested (like in Andy's
> > > > documentation):
> > > > > > - the file parking.conf (parking at '701', parked calls between
> > 702-720)
> > > > > > - include the parkedcalls context in my phones context
> > > > > > When I try to park a call to 701, I get the message "I'm sorry..
> > this is
> > > > not
> > > > > > a valid extension.. please try again" (my standard message for
> > undefined
> > > > > > extensions).
> > > > > >
> > > > > > Trying to 702 I get  "I'm sorry.. there is no call parked at
that
> > > > extension.
> > > > > > Please try again), which is a normal message.
> > > > > >
> > > > > > I miss something?
> > > > > >
> > > > > > Thanks,
> > > > > > Dan
> > > >
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > --
> > > Steven Critchfield  <critch at basesys.com>
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>