[Asterisk-Users] chan_sip.c problems problems from cvs 1.134

[Mark Spencer]

I believe this is fixed.  Sorry.

Mark

On Wed, 30 Jul 2003 yves.schaaf at restena.lu wrote:

>
> Hi,
>
> I am using the latest cvs release of asterisk, and the behaviour is in fact
> the same,
>
> outbound calls work fine,
> but for inbound calls (from C2651 over PSTN) , SIP messages get "blocked"
> by asterisk, and never reach the phone.
>
> The setup is the same : 7960 <------> asterisk <------> C2651<-----> PSTN
>
> Yves
>
>
> |---------+------------------------------------->
> |         |           "Low, Adam"               |
> |         |           <ALow at Prioritytelecom.com>|
> |         |           Sent by:                  |
> |         |           asterisk-users-admin at lists|
> |         |           .digium.com               |
> |         |                                     |
> |         |                                     |
> |         |           30/07/2003 11:37          |
> |         |           Please respond to         |
> |         |           asterisk-users            |
> |         |                                     |
> |---------+------------------------------------->
>   >-----------------------------------------------------------------------------------------------------------------------|
>   |                                                                                                                       |
>   |       To:       "'asterisk-users at lists.digium.com'" <asterisk-users at lists.digium.com>                                 |
>   |       cc:                                                                                                             |
>   |       Subject:  [Asterisk-Users] chan_sip.c problems problems from cvs 1.134                                          |
>   >-----------------------------------------------------------------------------------------------------------------------|
>
>
>
>
> All,
>
> I've found problems in my setup with the latest couple of revisions
> (1.135/1.136) of asterisk/channels/chan_sip.c In my setup I have a RH9
> asterisk server, AS5300 (single E1 to PSTN) and a dozen 7940's, everything
> is in the same VLAN and only running SIP.
>
> Outbound calls work fine: 7940 -SIP-> Asterisk -SIP-> AS5300
>
> But inbound calls fail, I see the initial INVITE from the AS5300 which is
> received by asterisk but not responded to and then the AS5300 sends another
> few INVITE's which are received but ignored assumable as they were
> duplicates for the first.
>
> Unfortunately since I've been trying the different cvs revisions of
> chan_sip.c I've got susbequent problems with the server crashing after the
> first INVITE from the AS5300 using anything greater than cvs 1.134
>
> I suspect this is something to do with the per-user limits added in cvs
> 1.135 but I am curious to see if anyone has any problems with the latest
> cvs elease of asterisk with SIP ?
>
> Adam
>
> Sip read:
> INVITE sip:4842 at 213.160.252.2;user=phone;phone-context=unknown SIP/2.0
> Via: SIP/2.0/UDP  213.160.252.50:53893
> From: "611012210" <sip:611012210 at 213.160.252.50>
> To: <sip:4842 at 213.160.252.2;user=phone;phone-context=unknown>
> Date: Wed, 30 Jul 2003 09:26:11 GMT
> Call-ID: 635D27D4-CB1D0233-0-8E9DB84 at 213.160.252.50
> Cisco-Guid: 1667049428-3407675953-0-149543808
> User-Agent: Cisco VoIP Gateway/ IOS 12.x/ SIP enabled
> CSeq: 101 INVITE
> Max-Forwards: 6
> Timestamp: 1059557171
> Contact: <sip:611012210 at 213.160.252.50:5060;user=phone>
> Expires: 180
> Content-Type: application/sdp
> Content-Length: 149
>
> v=0
> o=CiscoSystemsSIP-GW-UserAgent 5241 1607 IN IP4 213.160.252.50
> s=SIP Call
> c=IN IP4 213.160.252.50
> t=0 0
> m=audio 20032 RTP/AVP 8 0 65535 18
>
> 15 headers, 6 lines
> Using latest request as basis request
> Sending to 213.160.252.50 : 53893 (non-NAT)
> Found audio format 8
> Found audio format 0
> Found audio format 65535
> Found audio format 18
> Capabilities: us - 524302, them - 268/0, combined - 12
> Non-codec capabilities: us - 1, them - 0, combined - 0
> AM00CM01*CLI>
> Disconnected from Asterisk server
>
>
> ********* DISCLAIMER *********
>
> This message and any attachment are confidential and may be privileged or
> otherwise protected from disclosure and may include proprietary
> information. If you are not the intended recipient, please telephone or
> email the sender and delete this message and any attachment from your
> system. If you are not the intended recipient you must not copy this
> message or attachment or disclose the contents to any other person
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>