[Asterisk-Users] Australian Options

[Adam Goryachev]

> Adam why would you need a channel Bank for the E100P?
>
> Regards
>
> Mark McKibbin

As I specified below:

> Again, with smaller offices (say 15 or less extensions) the price of a
> TE400P card is too expensive, will there be a TE100P card produced and
> approved for use in Australia?
> Even if it is, will this solve the problem? I'm thinking not, because
> the single port would need to connect to a channel bank which in turn
> would connect to the telco plus extensions, therefore we are back to
> the same situation as with analog lines above.
[ie, requiring an E1 channel bank with approval for use in Australia]

So, I still haven't received a single suggestion to this question:

> So, really, are there any decent solutions for asterisk use in
> Australia?
>
> PS, currently I am using the TDM400B plus Traverse Netjet ISDN with I4L,
> but this doesn't seem suitable quality for re-sale.

Add-on, I know this isn't suitable quality for re-sale because it uses I4L
and not chan_capi, but I don't know of any chan_capi ISDN hardware which is
approved for use in Australia either.

If there was such a thing, this would at least easily enough provide 4
channels + 8 extensions with 2 x ISDN + 2 x TDM400B cards.... Then of
course, for 10 channels in with 14 extensions ?? Still need a channel bank
solution, or force the use of an OnRamp 10 with the TE400P which doesn't
have approval yet.

Regards,
Adam