[Asterisk-Users] how do I do s extensions with PRI

[Steven Critchfield]

A PRI Does not have a s extension as all calls will have a DID assigned
to the call. At best, on your 5th DID place a Goto to the s|1 and be
done with it.

On Wed, 2003-07-23 at 16:14, firedude at shorelinuxsolutions.com wrote:
> I would like to know how to define the s extension when I have an incoming 
> PRI line?  Currently I have 5 incoming DID numbers. Four of these DID 
> numbers I have going to specific extensions, the fifth number which is the 
> main number I wish to go to a background sound where callers can hear 
> message, get directory, dial extension, whatever.  I see that the way to 
> normally do this would be to define s extensions and then step up the 
> priorities for each action I wished to be taken.  However, with the PRI 
> line it seems that I can't use the s extension.  I can use exten => _X. 
> but this screws up the other four DID numbers which I have going to 
> specific extensions.  Is there a way with a PRI that I can define an s 
> extension or something like it to save from having to type an entire 10 
> digit string multiple places?  
> 
> Thanks for any suggestions.
> AJ
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield  <critch at basesys.com>