[Asterisk-Users] ATA-186 software upgrade 2.16.1 - notes?

[Chris Earle (CBL)]

so, do you think that this upgrade is worth doing, or should I hold out a
bit longer (since I am not having any troubles right now) until the next
release........?  I am assuming that there will probably still be a few more
upgrade releases...........


C  h  r  i  s    E  a  r  l  e
System Solutions Specialist

----- Original Message ----- 
From: "John Todd" <jtodd at loligo.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, July 17, 2003 9:06 PM
Subject: [Asterisk-Users] ATA-186 software upgrade 2.16.1 - notes?


>
> I see that there's now a 2.16.1 upgrade path for Cisco ATA-186
> devices, dated (variously) July 11 or July 14 2003.
>
> Here are some interesting bugs that claim to be fixed.  Most notable
> is CSCeb17953, at least from my perspective, as I've hit this bug
> before.
>
> CSCea42480 The Cisco ATA ignores the Require:100rel header and processes
call.
> CSCea69889 The Cisco ATA builds a 302 Moved Temporarily message
> incorrectly after receiving a NOTIFY message.
> CSCea93969 The Cisco ATA loses G.723 audio when call waiting occurs.
> CSCeb01064 The Cisco ATA From header domain value changes SRV record name.
> CSCeb17953 The Cisco ATA stops the registration process if it
> receives an unexpected response to a REGISTER request.
> CSCeb19228 The callback-on-busy feature does not work for calls to a PSTN.
> CSCeb23060 Upon receiving a 4xx response to a REGISTER request from a
> backup proxy, the Cisco ATA needs to continue retrying the request
> with the primary proxy .
> CSCeb24556 The Cisco ATA may fail to send a ring tone when acting as
> a transfer target in a blind transfer.
> CSCeb28218 The Cisco ATA, while in a call, detects audio from an incoming
call.
> CSCeb32210 When the SDP attribute a=fmtp appears before the attribute
> a=rtpmap , the Cisco ATA will not send out-of-band DTMF digits.
> CSCeb35955 Attended call transfers occur even when this feature is
> disabled via the PaidFeature configuration parameter.
> CSCeb36752 Call forwarding does not work when the Cisco ATA detects a
> busy signal.
> CSCeb37037 The Cisco ATA stops registering after a 2.16 upgrade is
performed.
> CSCeb37043 The call-waiting default user setting cannot be controlled
> by the CallFeatures configuration parameter when the Cisco ATA
> obtains its configuration file from the TFTP server.
> CSCeb40099 The Cisco ATA plays an incorrect tone after unconditional
> call forwarding is enabled or disabled.
> CSCeb44406 Change the behavior of the Cisco ATA to not remove all
> registrations.
>
> Full information can be found here:
>
>
http://www.cisco.com/en/US/products/hw/gatecont/ps514/prod_release_note09186a00801a2519.html
>
>
> JT
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users