[Asterisk-Users] H323/No one is available to answer at this time
Jeremy McNamara
jj at indie.org
Fri Jul 18 01:21:13 MST 2003
The actual error occurs before this spot in the trace. The most likely
cause is codec negocation failure.
Jeremy McNamara
isamar at isamarmaia.org wrote:
>Ok. I did a h.323 trace 5
>Looks like the other side is kicking me off during the negotiation...
>but I didn't figure out yet why.
>
>Here is some info:
>
> }
> }
> 0:30.215 H225 Caller:8105028 h323.cxx(1620) H225
>Handling
> PDU: CallProceeding callRef=25692
> 0:30.215 H225 Caller:8105028 h323neg.cxx(334) H245
>Stopping
> MasterSlaveDetermination: state=Outgoing
> 0:30.215 H225 Caller:8105028 h323neg.cxx(561) H245
>Stopping
> TerminalCapabilitySet: state=InProgress
> 0:30.215 H225 Caller:8105028 h323.cxx(1880) H225
>Set prot
>ocol version to 3 and implying H.245 version 5
> 0:30.215 H225 Caller:8105028 h323.cxx(2071) H225
>Set remo
>te party name: "200.221.40.50"
> 0:30.215 H225 Caller:8105028 h323.cxx(2079) H225
>Set remo
>te application name: "Internet Telephony Gateway -- Version 3.00
>R8.0 Gat
>eway (Build 4) 181/18247"
> 0:30.215 H225 Caller:8105028 h323.cxx(3876) H323
>Internal
>EstablishedConnectionCheck: connectionState=AwaitingSignalConnect
>fastStartState
>=FastStartDisabled
> 0:30.546 H225 Caller:8105028 h323pdu.cxx(474) H225
>Receivin
>g PDU:
> {
> 0:30.546 H225 Caller:8105028 h323pdu.cxx(474) H225
>Receivin
>g PDU:
> {
> q931pdu = {
> protocolDiscriminator = 8
> callReference = 25692
> from = destination
> messageType = ReleaseComplete
> IE: Cause - Normal call clearing = {
> 80 90 ..
> }
> IE: User-User = {
> 25 c0 06 00 08 91 4a 00 03 58 58 00 11 00 d2 25
>%.....J..XX....%
> de 20 6e b7 d7 11 87 e0 dc e4 32 ff e0 e7 08 80 .
>n.......2.....
> 01 00 ..
> }
> }
> h225pdu = {
> h323_uu_pdu = {
> h323_message_body = releaseComplete {
> protocolIdentifier = 0.0.8.2250.0.3
> reason = undefinedReason <<null>>
> callIdentifier = {
> guid = 16 octets {
> d2 25 de 20 6e b7 d7 11 87 e0 dc e4 32 ff e0 e7 .%.
>n.......2..
>.
> }
> }
> }
> h245Tunneling = FALSE
> }
> }
> }
>
>
> }
> 0:30.549 H225 Caller:8105028 h323.cxx(1620) H225
>Handling
> PDU: ReleaseComplete callRef=25692
> 0:30.549 H225 Caller:8105028 h323.cxx(1880) H225
>Set prot
>ocol version to 3 and implying H.245 version 5
> 0:30.549 H225 Caller:8105028 h323ep.cxx(1537) H323
>Clearing
> connection ip$localhost/25692 reason=EndedByRemoteUser
> 0:30.549 H225 Caller:8105028 h323.cxx(1403) H323
>Call end
> reason for ip$localhost/25692 set to EndedByRemoteUser
> 0:30.549 H225 Caller:8105028 h323.cxx(1421) H225
>Sending
>release complete PDU: callRef=25692
> 0:30.551 H225 Caller:8105028 h323pdu.cxx(474) H245
>Sending
>PDU:
> command endSessionCommand disconnect <<null>>
> 0:30.551 H225 Caller:8105028 h323.cxx(3085) H245
>Write PD
>U fail: no control channel.
> 0:30.552 H225 Caller:8105028 h323pdu.cxx(474) H225
>
>
>
> 0:30.215 H225 Caller:8105028 h323.cxx(2079) H225 Set
>remo
>te application name: "Internet Telephony Gateway -- Version 3.00
>R8.0 Gat
>eway (Build 4) 181/18247"
> 0:30.215 H225 Caller:8105028 h323.cxx(3876) H323 Internal
>EstablishedConnectionCheck: connectionState=AwaitingSignalConnect
>fastStartState=FastStartDisabled
> 0:30.546 H225 Caller:8105028 h323pdu.cxx(474) H225
>Receiving PDU:
> q931pdu = {
> protocolDiscriminator = 8
> callReference = 25692
> from = destination
> messageType = ReleaseComplete
> IE: Cause - Normal call clearing = {
> 80 90 ..
> }
> IE: User-User = {
> 25 c0 06 00 08 91 4a 00 03 58 58 00 11 00 d2 25
>%.....J..XX....%
> de 20 6e b7 d7 11 87 e0 dc e4 32 ff e0 e7 08 80 .
>n.......2.....
> 01 00 ..
> }
> }
> h225pdu = {
> h323_uu_pdu = {
> h323_message_body = releaseComplete {
> protocolIdentifier = 0.0.8.2250.0.3
> reason = undefinedReason <<null>>
> callIdentifier = {
> guid = 16 octets {
> d2 25 de 20 6e b7 d7 11 87 e0 dc e4 32 ff e0 e7 .%.
>n.......2..
>.
> }
> h245Tunneling = FALSE
> }
> }
> }
>
>
>
>
>
>
>
>
>There other side is a Planet(http://www.planet.com.tw) VOIP-400FXO.
>The ping time is aroung 400ms.
>Its configuration is:
> h323 display_name = hermann
> h323 h245_term_type = 60
> h323 rtp_port_base = 30000
> h323 out_fast_start = off
> h323 in_fast_start = on
> h323 h245_tunneling = off
> h323 cisco_t38 = off
> h323 callSignalPort = 1720
> h323 nat_call = off
> h323 call_name =
> h323 local_alert = off
> h323 default_dtmf = H323 V2 Signal
> No Alternate IP Defined!
> h323 dns_ip = 200.221.11.98 Domain:
> h323 gk_mode = off
> h323 h245_timeout = 30000
> h323 term_id = hermann
>
>
>This side is using chan_h323:
>setup is:
>
>[general]
>port = 1720
>bindaddr = 0.0.0.0
>accountcode=h323
>allow=all
>noFastStart = yes
>noH245Tunneling = yes
>noSilenceSuppression = no
>dtmfmode=rfc2833
>gatekeeper = DISABLE
>AllowGKRouted = no
>context=receiveh323
>
>
>[Hermann]
>type=peer
>host=200.221.40.50
>context=outgoing
>outgoinglimit=5
>
>
>Thanks in advance,
>
>Isamar
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
More information about the asterisk-users
mailing list