[Asterisk-Users] Alphanumerical digits

[Cristi]

I see the following line into debug (pri debug span 1):
1. Progress Description: Calling equipment is non-ISDN. (3) ]
2.  Calling Number (len=14) [ Ext: 0  TON: Unknown Number Type (0)  NPI: 
Unknown Number Plan (0)

Into a ISDN that is working I got this :

-- Making new call for cr 23274
-- Processing Q.931 Call Setup
-- Processing IE 33 (Sending Complete)
-- Processing IE 4 (Bearer Capability)
-- Processing IE 24 (Channel Identification)
-- Processing IE 30 (Progress Indicator)
-- Processing IE 108 (Calling Party Number)
-- Processing IE 112 (Called Party Number)
     -- Extension '9999' in context 'outbound'

Into this one I got only :
-- Processing Q.931 Call Setup
-- Processing IE 33 (Sending Complete)
-- Processing IE 4 (Bearer Capability)
-- Processing IE 24 (Channel Identification)
-- Processing IE 30 (Progress Indicator)
-- Processing IE 108 (Calling Party Number)

What parameters they not send!


The complet debugging is this:
< Protocol Discriminator: Q.931 (8)  len=34
< Call Ref: len= 2 (reference 162/0xA2) (Originator)
< Message type: SETUP (5)
< Sending Complete (len= 4)
< Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer 
capability: 3.1kHz audio (16)
<                              Ext: 1  Trans mode/rate: 64kbps, 
circuit-mode (16)
<                              Ext: 1  User information layer 1: A-Law (35)
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive 
Dchan: 0
<                        ChanSel: Reserved
<                       Ext: 1  Coding: 0   Number Specified   Channel 
Type: 3
<                       Ext: 1  Channel: 1 ]
< Progress Indicator (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 
0: 0   Location: Public network serving the remote user (4)
<                               Ext: 1  Progress Description: Calling 
equipment is non-ISDN. (3) ]
< Calling Number (len=14) [ Ext: 0  TON: Unknown Number Type (0)  NPI: 
Unknown Number Plan (0)
<                           Presentation: Unknown (1) '0788401422' ]
-- Making new call for cr 162
-- Processing Q.931 Call Setup
-- Processing IE 33 (Sending Complete)
-- Processing IE 4 (Bearer Capability)
-- Processing IE 24 (Channel Identification)
-- Processing IE 30 (Progress Indicator)
-- Processing IE 108 (Calling Party Number)
 > Protocol Discriminator: Q.931 (8)  len=14
 > Call Ref: len= 2 (reference 32930/0x80A2) (Terminator)
 > Message type: SETUP ACKNOWLEDGE (13)
 > Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, 
Exclusive Dchan: 0
 >                        ChanSel: Reserved
 >                       Ext: 1  Coding: 0   Number Specified   Channel 
Type: 3
 >                       Ext: 1  Channel: 1 ]
 > Progress Indicator (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard 
(0) 0: 0   Location: Private network serving the local user (1)
 >                               Ext: 1  Progress Description: Called 
equipment is non-ISDN. (2) ]
< Protocol Discriminator: Q.931 (8)  len=12
< Call Ref: len= 2 (reference 162/0xA2) (Originator)
< Message type: STATUS (125)
< Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0 
Location: Public network serving the local user (2)
<                  Ext: 1  Cause: Protocol error, unspecified (111), 
class = Protocol Error (6) ]
< Call State (len= 1) [ Ext: 0  Coding: CCITT (ITU) standard (0) Call 
state: Call Present (6)
-- Processing IE 8 (Cause)
-- Processing IE 20 (Call State)
< Protocol Discriminator: Q.931 (8)  len=13
< Call Ref: len= 2 (reference 162/0xA2) (Originator)
< Message type: DISCONNECT (69)
< Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0 
Location: Public network serving the local user (2)
<                  Ext: 1  Cause: Recover on timer expiry (102), class = 
Protocol Error (6) ]
< Progress Indicator (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 
0: 0   Location: Public network serving the remote user (4)
<                               Ext: 1  Progress Description: Calling 
equipment is non-ISDN. (3) ]
-- Processing IE 8 (Cause)
-- Processing IE 30 (Progress Indicator)
WARNING[9226]: File chan_zap.c, Line 5275 (pri_fixup): Call specified, 
but not found?
WARNING[9226]: File chan_zap.c, Line 5830 (pri_dchannel): Hangup on bad 
channel 1
< Protocol Discriminator: Q.931 (8)  len=9
< Call Ref: len= 2 (reference 162/0xA2) (Originator)
< Message type: RELEASE (77)
< Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0 
Location: Pub
lic network serving the local user (2)
<                  Ext: 1  Cause: Recover on timer expiry (102), class = 
Protoco
l Error (6) ]
-- Processing IE 8 (Cause)
 > Protocol Discriminator: Q.931 (8)  len=5
 > Call Ref: len= 2 (reference 32930/0x80A2) (Terminator)
 > Message type: RELEASE COMPLETE (90)
WARNING[9226]: File chan_zap.c, Line 5275 (pri_fixup): Call specified, 
but not f
ound?
WARNING[9226]: File chan_zap.c, Line 5830 (pri_dchannel): Hangup on bad 
channel
1



Any ideas why this happening?