[Asterisk-Users] ISDN PRI E1 configuration with E100P
surajee at infotechs.lk
surajee at infotechs.lk
Fri Jul 11 21:27:50 MST 2003
here are the outputs,
for, zttool,
Alarms Span
RED LSS Wildcard T100P T1/PRI Board card 0
for head /proc/zaptel/1
Span 1: WCT1/0 "LSS Wildcard T100P T1/PRI Board card 0" HDB3/CCS/CRC4 RED
1 WCT1/0/1 ClearChannel
2 WCT1/0/2 ClearChannel
3 WCT1/0/3 ClearChannel
4 WCT1/0/4 ClearChannel
5 WCT1/0/5 ClearChannel
6 WCT1/0/6 ClearChannel
7 WCT1/0/7 ClearChannel
8 WCT1/0/8 ClearChannel
9 WCT1/0/9 ClearChannel
any idea?
Surajee
----- Original Message -----
From: "Martin Pycko" <martinp at digium.com>
To: <asterisk-users at lists.digium.com>
Sent: Saturday, July 12, 2003 12:41 AM
Subject: Re: [Asterisk-Users] ISDN PRI E1 configuration with E100P
> Look in zttool or "head /proc/zaptel/[1-5]
> to see if the spans are in alarms. The leds on your boards might not lit
> properly.
>
> regards
> Martin
>
> On Fri, 11 Jul 2003 surajee at infotechs.lk wrote:
>
> > yes, now i got the that problem solved, with 'immediate=yes', but now i've
> > faced with another,
> > When I connect the E1 to the cards, the LED lights does not change to green,
> > in E100P, its blinking red (even when there is no E1 plugged, its blinking
> > red)
> > and in E400P, its solid red. (this was the same even without
> > 'immediate=yes')
> >
> > When i start asterisk, the cards starts fine (as we see), givin the
> > following output,
> > *CLI>
> > == D-Channel on span 1 up
> > -- B-channel 1 successfully restarted on span 1
> > -- B-channel 2 successfully restarted on span 1
> > . . .
> > -- B-channel 31 successfully restarted on span 1
> >
> > after i put 'immediate=yes', i can even call from outside to the PRI E1, and
> > get connected to asterisk, and listen to the prompts played by asterisk
> >
> > -- Accepting call from '062279955' to 's' on channel 1, span 1
> > -- Executing Wait("Zap/1-1", "2") in new stack
> > -- Executing Answer("Zap/1-1", "") in new stack
> > -- Executing DigitTimeout("Zap/1-1", "5") in new stack
> > -- Set Digit Timeout to 5
> > -- Executing ResponseTimeout("Zap/1-1", "10") in new stack
> > -- Set Response Timeout to 10
> > -- Executing BackGround("Zap/1-1", "demo-congrats") in new stack
> > -- Playing 'demo-congrats'
> >
> > But calling to outside from asterisk fails (with the following errors), we
> > don't know whether this related to the above problem
> >
> > Executing Dial("SIP/802-8a26", "Zap/g2/0129063800|20|t") in new stack
> > NOTICE[262160]: File app_dial.c, Line 481 (dial_exec): Unable to create
> > channel of type 'Zap'
> > == Everyone is busy at this time
> > -- Executing Congestion("SIP/802-8a26", "") in new stack
> > == Spawn extension (sip, 980129063800, 2) exited non-zero on
> > 'SIP/802-8a26'
> >
> > Following are new zaptel and zapata conf files,
> >
> > zapata.conf
> >
> > [channels]
> > transfer=yes
> > echocancel=yes
> > callprogress=yes
> > immediate=yes
> >
> > ;E100p card
> > switchtype=EuroISDN
> > signalling=pri_cpe
> > pridialplan=unknown
> > context=inbound-pstn
> > group=2
> > channel => 1-15,17-31
> >
> > zaptel.conf
> >
> >
> > #E100p card
> > span=1,0,0,ccs,hdb3,crc4
> > bchan=1-15,17-31
> > dchan=16
> >
> > defaultzone=us
> > loadzone=us
> >
> >
> > Thank you,
> >
> > Surajee
> >
> > ----- Original Message -----
> >
> > From: "Cristi" <cvasiliu at accessnet.ro>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Friday, July 11, 2003 10:39 PM
> > Subject: Re: [Asterisk-Users] ISDN PRI E1 configuration with E100P
> >
> >
> > > surajee at infotechs.lk wrote:
> > >
> > > > hi Everyone,
> > > >
> > > > We are configuring an ISDN PRI E1 with an E100P card, when you load
> > > > the drivers, and starts the asterisk, cards also starts fine, givin
> > > > following output,
> > > >
> > > > *CLI>
> > > > == D-Channel on span 1 up
> > > > -- B-channel 1 successfully restarted on span 1
> > > > -- B-channel 2 successfully restarted on span 1
> > > > . . .
> > > > -- B-channel 31 successfully restarted on span 1
> > > >
> > > > but, when we make a call to this E1 from outside, it gives the
> > > > following error,
> > > >
> > > > WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call
> > > > specified, but not found?
> > > > WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on
> > > > bad channel 1
> > > > WARNING[213006]: File chan_zap.c, Line 5248 (pri_fixup): Call
> > > > specified, but not found?
> > > > WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on
> > > > bad channel 2
> > > >
> > > > does anybody hav an idea on this?
> > > >
> > > > our zaptel.conf is,
> > > >
> > > > #E100p card
> > > > span=1,0,0,ccs,hdb3,crc4
> > > > bchan=1-15,17-31
> > > > dchan=16
> > > >
> > > > zapata.conf,
> > > >
> > > > ;E100p card
> > > > switchtype=EuroISDN
> > > > signalling=pri_cpe
> > > > pridialplan=unknown
> > > > context=incoming
> > > > group = 2
> > > > channel => 1-15,17-31
> > > >
> > > > Thanks inadvance,
> > > >
> > > > Surajee
> > > >
> > > >
> > > > --------------This mail sent through OmniBIS.com--------------
> > > > _______________________________________________ Asterisk-Users mailing
> > > > list Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > > I was having the same problem because : 1 number for E1 and the local
> > > PTSN was not sending the DID to select the appropriate extension. Set
> > > the immediate=yes into zapata.conf and catch the call into s extension!
> > > Thanks to Martin Pycko ...
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> >
> >
> > --------------This mail sent through OmniBIS.com--------------
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--------------This mail sent through OmniBIS.com--------------
More information about the asterisk-users
mailing list