[Asterisk-Users] channel bank configuration

Steven Critchfield critch at basesys.com
Fri Jul 11 19:25:32 MST 2003


On Fri, 2003-07-11 at 13:18, firedude at shorelinuxsolutions.com wrote:
> Ok, my channel bank is configured.  The signaling is configured for 
> fxsloopstart. The framing is esf.  The line is b8zs.
> 
> When I plug in a crossover cable from the T100P to the channel bank my T1 
> line status indicator shows a red light.  However if I plug a crossover 
> cable straight from the Dmark (PRI) to the channel bank my T1 line status 
> indicator shows green.  So I'm thinking my problem is with either my T100P 
> cards/asterisk or the crossover cable but I don't think it's the crossover 
> cable. Any suggestions on what I should do next or how I can trouble shoot 
> it?

You use a straight through cable for a PRI to T100P therefore your cable
isn't cross over.

> On 11 Jul 2003, Steven Critchfield wrote:
> 
> > On Fri, 2003-07-11 at 08:59, firedude at shorelinuxsolutions.com wrote:
> > > I have a premisys slimline 24 channel fxs channel bank.  I'm attempting to 
> > > get it configured to work with my asterisk server.  I have 2 T100P cards 
> > > in the asterisk box.  One is connected to an incoming pri, the second is 
> > > connected to the channel bank.  
> > > 
> > > In my /etc/zaptel.conf file I have the line fxoks=25-48
> > > In my zapata.conf file I have the line signaling=fxo_ks
> > > 
> > > When talking to the company I bought the channel bank from, they wish to 
> > > know what type of signaling the channel bank will get.  Apparently their 
> > > only familiar with connectling the channel bank straight to the T1 line.  
> > > What type of signalling do I need to advise them that the channel bank is 
> > > receiving?  He advised me that they commonly see loopstart signaling.  
> > > When I mentioned Koolstart to him, he was unfamiliar with it. I went with 
> > > fxoks because that is what someone on the list recommended.  All 
> > > suggestions are appreciated.
> > > AJ
> > 
> > Koolstart is loopstart with disconnect supervision.
> > 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield <critch at basesys.com>




More information about the asterisk-users mailing list