[Asterisk-Users] channel bank configuration

[Steven Critchfield]

On Fri, 2003-07-11 at 08:59, firedude at shorelinuxsolutions.com wrote:
> I have a premisys slimline 24 channel fxs channel bank.  I'm attempting to 
> get it configured to work with my asterisk server.  I have 2 T100P cards 
> in the asterisk box.  One is connected to an incoming pri, the second is 
> connected to the channel bank.  
> 
> In my /etc/zaptel.conf file I have the line fxoks=25-48
> In my zapata.conf file I have the line signaling=fxo_ks
> 
> When talking to the company I bought the channel bank from, they wish to 
> know what type of signaling the channel bank will get.  Apparently their 
> only familiar with connectling the channel bank straight to the T1 line.  
> What type of signalling do I need to advise them that the channel bank is 
> receiving?  He advised me that they commonly see loopstart signaling.  
> When I mentioned Koolstart to him, he was unfamiliar with it. I went with 
> fxoks because that is what someone on the list recommended.  All 
> suggestions are appreciated.
> AJ

Koolstart is loopstart with disconnect supervision.
-- 
Steven Critchfield <critch at basesys.com>