[Asterisk-Users] G729 codec problems

[Dave Alan Caruana]

Hi I seem to have installed the G729 codec properly
but can't seem to get it to work ..

in the Asterisk startup I see ..
 [codec_g729b.so] => (Annex B (floating point) G.729/PCM16 Codec Translator)
  == Detected 1 licensed G.729 transcoders
WARNING[1074408160]: File translate.c, Line 218 (calc_cost): Translator
'g729tolinb' does not produce sample frames.
  == Registered translator 'g729tolinb' from format 8 to 6, cost 99999
  == Registered translator 'lintog729b' from format 6 to 8, cost 26

Is this normal ?

also from h.323 show codecs I do not see G729 in the list,
and G729 calls fail.

*CLI> h.323 show codecs
Allowed Codecs:
         Table:
   SpeexNarrow-5.95k{sw} <1>
   SpeexNarrow-8k{sw} <2>
   SpeexNarrow-11k{sw} <3>
   SpeexNarrow-15k{sw} <4>
   SpeexNarrow-18.2k{sw} <5>
   G.723.1{sw} <6>
   GSM-06.10{sw} <7>
   G.711-uLaw-64k{sw} <8>
   G.711-ALaw-64k{sw} <9>
   SpeexNarrow-5.95k{sw} <10>
   SpeexNarrow-8k{sw} <11>
   SpeexNarrow-11k{sw} <12>
   SpeexNarrow-15k{sw} <13>
   SpeexNarrow-18.2k{sw} <14>
   G.723.1{sw} <15>
   GSM-06.10{sw} <16>
   G.711-uLaw-64k{sw} <17>
   G.711-ALaw-64k{sw} <18>
   SpeexNarrow-5.95k{sw} <19>
   SpeexNarrow-8k{sw} <20>
   SpeexNarrow-11k{sw} <21>
   SpeexNarrow-15k{sw} <22>
   SpeexNarrow-18.2k{sw} <23>
   G.723.1{sw} <24>
   GSM-06.10{sw} <25>
   G.711-uLaw-64k{sw} <26>
   G.711-ALaw-64k{sw} <27>


cheers
Dave Alan Caruana