[Asterisk-Users] Using multiple iconnecthere accounts

[Martin Pycko]

On your place I would check separately if you can use both accounts. I
think that one of your accounts in disabled ...

Martin

On Tue, 8 Jul 2003, Derek Beaumont wrote:

> First off, sorry for using a mail client without the "in-reply-to"
> function.
>
> Second:  I still can't make two calls using iconnecthere at the same
> time.
> Here is what I have tried:
>
> Attempt 1:
> >>exten=>_91NXXNXXXXXX,1,Dial,StripMSD
> >>exten=>_1NXXNXXXXXX,2,Dial,SIP/BYEXTENSION at iconnect
> >>exten=>_1NXXNXXXXXX,3,Dial,SIP/BYEXTENSION at iconnect2
>
> Attempt 2:
> >>exten=>_91NXXNXXXXXX,1,Dial,StripMSD
> >>exten=>_1NXXNXXXXXX,2,Dial,SIP/BYEXTENSION at iconnect
> >>exten=>_1NXXNXXXXXX,103,Dial,SIP/BYEXTENSION at iconnect2
>
> Attempt 3:
> >>exten => _91NXXNXXXXXX,1,Dial(SIP/${EXTEN:1}@iconnect)
> >>exten => _91NXXNXXXXXX,2,Dial(SIP/${EXTEN:1}@iconnect2)
>
> Attempt 4:
> exten =>
> _91NXXNXXXXXX,1,Dial,SIP/${EXTEN:1}@iconnect&SIP/${EXTEN:1}@iconnect2
>
>
> So far nothing has worked.
>
> Another question I have is about jitter buffer.  Is there a way to
> create a
> Jitter buffer in sip.conf?
> When I type sip show channels I get the following output:
>
> sip show channels
> Peer             Username    Call ID      Seq (Tx/Rx)  Lag      Jitter
> Format
> 213.137.73.176   xxxxxxxxxx  5752cb7a55f  00103/00000  00000ms  0000ms
> 4
>
> There is a section for Jitter, so I would imagine that there is some way
> to do it.
>
> Thank you for your time.
> Also, if anybody could suggest a good mail client for windows that is
> able to
> use the in-reply-to function, it would be helpful.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>