[Asterisk-Users] PCI Master Abort

[Joe Antkowiak]

You can force IRQs in your BIOS config, I would set each card to its own IRQ
that doesn't get shared with anything else.  Disable your serial and
parallel ports if you aren't using them and use 3,4,5,7

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Derek Beaumont
Sent: Monday, July 07, 2003 4:15 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] PCI Master Abort

I am always getting multiple PCI Master Abort messages when I try to
plug in a second TDM400P.
I have asked this question before, but I nothing really solved my
problem and I just put it on the back burner for a while.
I am at a point where this is a crucial issue.

I have read that the Zaptel devices share an IRQ, is this causing the
problem?
Is there a way that I can manually change the IRQs of the devices?

By the way, my hardware situation is as follows:
2 X100P
2 TDM400P

Any help is always appreciated.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users