[Asterisk-Users] PCI Master abort (debian / S400P & X101P

[frank.barthe at prescom.net]

Debian / kernel 2.4.18.
Found in /proc/pci ::
    Bus  0, device   0, function  0:    Host bridge: Intel Corp. 430HX -
82439HX TXC [Triton II] (rev 3).
    Bus  0, device   7, function  0:    ISA bridge: Intel Corp. 82371SB PIIX3
ISA [Natoma/Triton II] (rev 1).
    Bus  0, device   7, function  1:    IDE interface: Intel Corp. 82371SB
PIIX3 IDE [Natoma/Triton II] (rev 0).
    Bus  0, device   9, function  0:    VGA compatible controller: IRQ 10.
    Bus  0, device  10, function  0:    Tiger Jet Network Inc. Model 300 128k
(rev 0). IRQ 12.
    Bus  0, device  12, function  0:    Tiger Jet Network Inc. Model 300 128k
(#2) (rev 0). IRQ 9.
    Bus  0, device  11, function  0:    Realtek Semiconductor Co., Ltd.
RTL-8029(AS) (rev 0). IRQ 11.

Commands sent :
    => modprobe zaptel
    => modprob wcfxs
    => modprobe wcfxo

No pb !

THEN :

    wait about 2 minutes (no more command passed)
    => PCI Master abort

OR

    => asterisk -cvvv
    => (zt_open): Unable to specify channel 1
    => PCI Master abort
_______________________________________________________________________________

Does any body work with the same HW configuration (1 FXO + 1 FXS) ?
(Wildcard S400P 4 modules / 1 installed   +   Wildcard X101P)