T1 to Fixed-Wireless ...Re: [Asterisk-Users] Looking for Channel Banks

[Brian Johnson]

In this example, do the cellphones require a cell phone service provider or
is the Asterisk box hardware providing the service?


> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Jim Fleming
> Sent: Friday, February 21, 2003 12:56
> To: asterisk-users at lists.digium.com
> Subject: T1 to Fixed-Wireless ...Re: [Asterisk-Users] Looking for
> Channel Banks
>
>
> ----- Original Message -----
> From: "Eric Wieling" <eric at fnords.org>
> > I'm looking for reccomendations for basic T-1 channel banks.
> > I'm looking for models with FXO interfaces and models with FXS
> > interfaces.  I imagine that models with only one type of
> > interface would be cheaper than the modular models.
> ====
>
> You might also want to consider the T1 to Fixed-Wireless
> (cell-phone on a board) approach...
> http://www.valiantcom.com/vclgsm/t1/vcl_gsm_t1.htm
>
> Those FX* interfaces can be viewed as FXO, but if you have a
> wireless service that allows for
> unlimited calls from other wireless devices, then, people can
> call into those FX* interfaces and
> be connected to your Asterisk server via the T1. It is like
> taking 24 (T1) or 30 (E1) cellphones
> and hooking them to your server. They can dial in and out to the
> wireless provider for local
> (whatever local is) voice transport and access to the PSTN.
>
> Jim Fleming
> http://IPv8.isfun.net
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>