[Asterisk-Users] asterisk.conf

[Mark Spencer]

Sorry I didn't realize I'd missed something in your patch, anyway it's
fixed in CVS.

Mark

On 21 Feb 2003, Klaus-Peter Junghanns wrote:

> Hi Martin,
>
> yes it's not even in the CVS. Probably because Mark missed
> it when he applied my patch. I told him several times on IRC
> but then gave up, because it's build by "make samples".
> Take a look at the makefile, ... btw..it's not totally useless.
>
> regards
>
> kapejod
>
> --
> Klaus-Peter Junghanns
>
> CEO,CTO
> Junghanns.NET Internet-Services & Software-Development GmbH
> Breite Strasse 13 - 12167 Berlin - Germany
> fon:    +49 30 79705392
> fax:    +49 30 79705391
> mobile: +49 160 7503372
> email:  kpj at junghanns.net
>
>
> Am Fre, 2003-02-21 um 19.46 schrieb Martin Pycko:
> > This file asterisk.conf is not even in CVS.
> >
> > regards
> > Martin
> >
> > On 20 Feb 2003, Ben Klang wrote:
> >
> > > Instead of deleting asterisk.conf, adding
> > > [global]
> > > to the top also fixes the problem
> > >
> > > -BAK
> > >
> > > On Wed, 2003-02-19 at 10:40, Martin Pycko wrote:
> > > > Hello.
> > > >
> > > > The RED alarm on X101P means that the card doesn't see
> > > > the line voltage. Now check the cable, etc. and plug
> > > > the phone to PHONE plug on X101P so you would know when
> > > > everything is connected well.
> > > >
> > > > Also delete asterisk.conf file since it's not needed.
> > > >
> > > > regards
> > > > Martin
> > > >
> > > > On Tue, 18 Feb 2003, duncan wrote:
> > > >
> > > > > i did a new cvs install yesterday, and after some tweaking i have got the
> > > > > hardware to load properly (thanks to the devkitlight sample
> > > > > configuration).  i am still getting a red alarm on my Wildcard X101P and
> > > > > when i run just the "asterisk" command (to start a daemon process) i get
> > > > > this error:
> > > > >
> > > > > WARNING[1024]: File config.c, Line 230 (cfg_process): parse error: No
> > > > > category context for line 1 of /etc/asterisk/asterisk.conf
> > > > >
> > > > > asterisk still loads in the background, and i can connect with asterisk -r
> > > > > but i dont understand the asterisk.conf error.  asterisk.conf is a recently
> > > > > included file (its not on any of my older cvs versions) and all it seems to
> > > > > do is provide the directories that asterisk uses.
> > > > >
> > > > > so what could be causing the red alarm on the X101P?
> > > > >
> > > > >
> > > > > duncan
> > > > >
> > > > > _______________________________________________
> > > > > Asterisk-Users mailing list
> > > > > Asterisk-Users at lists.digium.com
> > > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > >
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>