[Asterisk-Users] IConnectHere: Outbound working, Inbound not working....

[Eric Wieling]

Thanks to a response to my earlier post I have outbound calling
working from a SIP Softphone to numbers on the PSTN via
iconnecthere.  

Now I'm trying to get inbound calling working.  It seems that
when a call comes into Asterisk via iconnecthere it always falls
into the "s" extention.  I have two phone numbers with
iconnecthere and want to route calls to each of the numbers
differently.  Can this be done?  If so, how?

Basically I want callers to 1813342XXXX to be routed to 2102 and
calls to 1202454XXXX to be routed to 2103

Thanks in advance for any help!

Here are my config files:

;
; SIP Configuration for Asterisk
;
[general]
port = 5060			; Port to bind to
bindaddr = 0.0.0.0		; Address to bind to
context = default		; Default for incoming calls
register=1813342XXXX:XXXXXX at sipauth.deltathree.com 
register=1202454XXXX:XXXXXX at sipauth.deltathree.com 

[iconnecthere]
type=friend
username=XXXXXX
secret=XXXXXX
host=sipauth.deltathree.com
context=default

[2102]
type=friend
secret=XXXXXX
host=dynamic
context=default

[2103]
type=friend
secret=XXXXXX
host=dynamic
context=default

;
; Extention Configuration for Asterisk
;
[default]

exten => 2102,1,Dial,SIP/2102 at 2102
exten => 2102,2,Voicemail(2102)

exten => 2103,1,Dial,SIP/2103 at 2103
exten => 2103,2,Voicemail(2103)

exten => _91XXXXXXXXXX,1,Dial,SIP/${EXTEN-1}@iconnecthere
exten => _91XXXXXXXXXX,2,Congestion

exten => s,1,Wait,1			; Wait a second, just for fun
exten => s,2,Answer			; Answer the line
exten => s,3,DigitTimeout,5		; Set Digit Timeout to 5 seconds
exten => s,4,ResponseTimeout,10		; Set Response Timeout to 10 seconds
exten => s,5,Directory,default

exten => t,1,Goto(#,1)			; If they take too long, give up
exten => i,1,Playback(invalid)		; "That's not valid, try again"