[Asterisk-Users] asterisk crash

firedude at shorelinuxsolutions.com firedude at shorelinuxsolutions.com
Mon Dec 29 11:43:59 MST 2003


Brian
I have a 24 channel fxs channel bank.  The asterisk server has 2 digium 
T100 cards.  One connects to the channel bank and one connects to the 
Dmark (PRI).  As I understand it the line signalling=pri_cpe is for the 
card that talks to the Dmark (PRI), channel => 1-23 then signalling=fxo_ks 
is for signalling the channel bank.  And under that are channels 25-48.
AJ



On Mon, 29 Dec 2003, Brian West wrote:

> If you have a 24 channel bank you don't use pri_cpe remove that line.
> 
> channe => 1-24
> signalling=fxo_ks
> 
> Thats all you need.
> 
> 
> 
> On Mon, 29 Dec 2003 firedude at shorelinuxsolutions.com wrote:
> 
> > In my zapata.conf file I have:
> > channel => 1-23
> > signalling=pri_cpe
> > signalling=fxo_ks
> >
> >
> > I have a 24 channel channelbank on the inside and a pri coming from
> > Verizon on the outside.  All previously worked fine with my zaptel.conf
> > file and zapata.conf file.
> >
> >
> > On Mon, 29 Dec 2003, Tim Thompson wrote:
> >
> > > It has to do w/ your /etc/asterisk/Zapata.conf file.
> > >
> > > We need to know what your T1 configuration is.
> > >
> > > 24 FXS ports
> > > 12 FXO Ports/12 FXS
> > >
> > > and also it matters in what order.
> > >
> > >
> > >
> > >
> > > Tim Thompson
> > > Commercial Sales Engineer
> > > http://www.amatechtel.com
> > > (806) 722-2227
> > >
> > >
> > > -----Original Message-----
> > > From: firedude at shorelinuxsolutions.com
> > > [mailto:firedude at shorelinuxsolutions.com]
> > > Sent: Monday, December 29, 2003 8:56 AM
> > > To: asterisk-users at lists.digium.com
> > > Subject: Re: [Asterisk-Users] asterisk crash
> > >
> > > The only things uncommented in my /etc/zaptel.conf file are as follows:
> > > span=1,1,0,esf,b8zs
> > > span=2,0,0,esf,b8zs
> > > loadzone=us
> > > defaultzone=us
> > >
> > >
> > >
> > >
> > >
> > > On Mon, 29 Dec 2003, zoa wrote:
> > >
> > > > try running ztcfg first
> > > >
> > > >
> > > >
> > > >
> > > > At 09:26 29/12/2003 -0500, you wrote:
> > > > >Hello all
> > > > >I just checked out the latest
> > > > >zaptel/zapata/libpri/asterisk/asterisk-addons from the cvs and ran
> > > through
> > > > >the entire make procedures.  Everything seemed to go fine however now
> > > when
> > > > >I attempt to start asterisk, it says ok but it seems to be
> > > immediately
> > > > >crashing. The following messages are displayed in my
> > > > >/var/log/asterisk/messages file for the time right around the crash:
> > > > >Dec 29 10:09:37 WARNING[1074395872]: File chan_zap.c, Line 7341
> > > > >(setup_zap): Ignoring rxwink
> > > > >Dec 29 10:09:37 ERROR[1074395872]: File chan_zap.c, Line 5159
> > > (mkintf):
> > > > >Unable to get span status: Inappropriate ioctl for device
> > > > >Dec 29 10:09:37 ERROR[1074395872]: File chan_zap.c, Line 7081
> > > (setup_zap):
> > > > >Unable to register channel '1-23'
> > > > >Dec 29 10:09:37 WARNING[1074395872]: File loader.c, Line 312
> > > > >(ast_load_resource): chan_zap.so: load_module failed, returning -1
> > > > >
> > > > >Does anyone have any insight on this?  Everything compiled fine and
> > > was
> > > > >working fine with my previous version of asterisk.
> > > > >Thanks
> > > > >AJ
> > > > >
> > > > >
> > > > >_______________________________________________
> > > > >Asterisk-Users mailing list
> > > > >Asterisk-Users at lists.digium.com
> > > > >http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 




More information about the asterisk-users mailing list