[Asterisk-Users] asterisk crash

[firedude at shorelinuxsolutions.com]

In my zapata.conf file I have: 
channel => 1-23
signalling=pri_cpe
signalling=fxo_ks


I have a 24 channel channelbank on the inside and a pri coming from 
Verizon on the outside.  All previously worked fine with my zaptel.conf 
file and zapata.conf file.


On Mon, 29 Dec 2003, Tim Thompson wrote:

> It has to do w/ your /etc/asterisk/Zapata.conf file.
> 
> We need to know what your T1 configuration is.
> 
> 24 FXS ports
> 12 FXO Ports/12 FXS  
> 
> and also it matters in what order.
> 
> 
> 
> 
> Tim Thompson
> Commercial Sales Engineer
> http://www.amatechtel.com
> (806) 722-2227
> 
> 
> -----Original Message-----
> From: firedude at shorelinuxsolutions.com
> [mailto:firedude at shorelinuxsolutions.com] 
> Sent: Monday, December 29, 2003 8:56 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] asterisk crash
> 
> The only things uncommented in my /etc/zaptel.conf file are as follows:
> span=1,1,0,esf,b8zs
> span=2,0,0,esf,b8zs
> loadzone=us
> defaultzone=us
> 
> 
> 
> 
> 
> On Mon, 29 Dec 2003, zoa wrote:
> 
> > try running ztcfg first
> > 
> > 
> > 
> > 
> > At 09:26 29/12/2003 -0500, you wrote:
> > >Hello all
> > >I just checked out the latest
> > >zaptel/zapata/libpri/asterisk/asterisk-addons from the cvs and ran
> through
> > >the entire make procedures.  Everything seemed to go fine however now
> when
> > >I attempt to start asterisk, it says ok but it seems to be
> immediately
> > >crashing. The following messages are displayed in my
> > >/var/log/asterisk/messages file for the time right around the crash:
> > >Dec 29 10:09:37 WARNING[1074395872]: File chan_zap.c, Line 7341
> > >(setup_zap): Ignoring rxwink
> > >Dec 29 10:09:37 ERROR[1074395872]: File chan_zap.c, Line 5159
> (mkintf):
> > >Unable to get span status: Inappropriate ioctl for device
> > >Dec 29 10:09:37 ERROR[1074395872]: File chan_zap.c, Line 7081
> (setup_zap):
> > >Unable to register channel '1-23'
> > >Dec 29 10:09:37 WARNING[1074395872]: File loader.c, Line 312
> > >(ast_load_resource): chan_zap.so: load_module failed, returning -1
> > >
> > >Does anyone have any insight on this?  Everything compiled fine and
> was
> > >working fine with my previous version of asterisk.
> > >Thanks
> > >AJ 
> > >
> > >
> > >_______________________________________________
> > >Asterisk-Users mailing list
> > >Asterisk-Users at lists.digium.com
> > >http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>