[Asterisk-Users] RE: TDM Card loses Dialtone and Battery
Sean Cheesman
scheesman at gdsworks.com
Sun Dec 28 22:23:36 MST 2003
now we're getting somewhere! anything above interrupt 15 will be interrupt
sharing. bad! If you can get the cards assigned to 10 or 11, you should be
in better shape.
Sean
-----Original Message-----
From: Victor Rini [mailto:victor at paceint.com]
Sent: Monday, December 29, 2003 12:12 AM
To: 'asterisk-users at lists.digium.com'
Subject: [Asterisk-Users] RE: TDM Card loses Dialtone and Battery
Andrew:
I tried the asterisk -vvvc suggestion and I didn't get any messages when the
card died.
Here's /proc/interrupts before I take out the sound card:
CPU0
0: 102777 IO-APIC-edge timer
1: 471 IO-APIC-edge keyboard
2: 0 XT-PIC cascade
8: 4 IO-APIC-edge rtc
14: 9159 IO-APIC-edge ide0
15: 6 IO-APIC-edge ide1
17: 1995769 IO-APIC-level wcfxo, wcfxo
18: 341396 IO-APIC-level wcfxs
19: 0 IO-APIC-level EMU10K1
20: 3390 IO-APIC-level eth1
21: 8652 IO-APIC-level eth0
22: 788 IO-APIC-level eth2
NMI: 0
LOC: 102728
ERR: 0
MIS: 0
and after:
CPU0
0: 14903 IO-APIC-edge timer
1: 2 IO-APIC-edge keyboard
2: 0 XT-PIC cascade
8: 4 IO-APIC-edge rtc
14: 7469 IO-APIC-edge ide0
15: 6 IO-APIC-edge ide1
17: 111534 IO-APIC-level wcfxo
18: 111626 IO-APIC-level wcfxo
19: 104013 IO-APIC-level wcfxs
20: 680 IO-APIC-level eth1
21: 509 IO-APIC-level eth0
22: 41 IO-APIC-level eth2
NMI: 0
LOC: 14855
ERR: 0
MIS: 0
About load: almost impossible to tell. I was sshed into the server and
running top - top was showing the system 100%
idle. Then I hit a download link and bang, the card died.
This is all pretty academic at this point - I think Tilghman found the
problem for me.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list